1 files changed, 0 insertions, 121 deletions
diff --git a/src/compileAndRun/pythonSupportFiles/LuxcenaNeo/Strip.py b/src/compileAndRun/pythonSupportFiles/LuxcenaNeo/Strip.py
deleted file mode 100644
index c3a913f..0000000
--- a/src/compileAndRun/pythonSupportFiles/LuxcenaNeo/Strip.py
+++ /dev/null
@@ -1,121 +0,0 @@
-from neopixel import *
-from Matrix import Matrix, getSegmentRange
-
-class Strip:
-
-    def __init__(self, stripConf):
-        self.SEGMENTS = stripConf["segments"]
-        self.SEGMENT_CONFIG = stripConf["segment_config"]
-
-        self.LED_FREQ_HZ = stripConf["led_freq_hz"]  # LED signal frequency in hertz (usually 800khz)
-        self.LED_CHANNEL = stripConf["led_channel"]  # Set to '1' for GPIOs 13, 19, 41, 45, 53
-        self.LED_INVERT  = stripConf["led_invert"]   # True to invert the signal, (when using NPN transistor level shift)
-        self.LED_PIN     = stripConf["led_pin"]      # 18 uses PWM, 10 uses SPI /dev/spidev0.0
-        self.LED_DMA     = stripConf["led_dma"]      # DMA channel for generating the signal, on the newer ones, try 10
-        self.LED_COUNT   = sum(self.SEGMENTS)        # Number of LEDs in strip
-
-
-        self.LED_BRIGHTNESS = 255
-
-        self.strip = Adafruit_NeoPixel(
-            self.LED_COUNT,
-            self.LED_PIN,
-            self.LED_FREQ_HZ,
-            self.LED_DMA,
-            self.LED_INVERT,
-            self.LED_BRIGHTNESS,
-            self.LED_CHANNEL
-        )
-
-        self.strip.begin()
-
-        # Blank out all the LEDs
-        i = 0
-        while True:
-            self.strip.setPixelColor(i, 0)
-            i += 1
-            if (i > self.LED_COUNT): break
-        self.strip.show()
-
-        # Setup matrix
-        print("  * Generating matrix")
-        #try:
-        self.pixelMatrix = Matrix(self.SEGMENTS, stripConf["matrix"])
-        self.pixelMatrix.dump()
-        #except:
-        #    print("Something went wrong while setting up your self-defined matrix.")
-
-    def show(self):
-        """Update the display with the data from the LED buffer."""
-        self.strip.show()
-
-    def setPixelColor(self, n, color):
-        """Set LED at position n to the provided 24-bit color value (in RGB order).
-        """
-        self.strip.setPixelColor(n, color)
-
-    def setPixelColorXY(self, x, y, color):
-        """Set LED at position n to the provided 24-bit color value (in RGB order).
-        """
-        self.strip.setPixelColor(self.pixelMatrix.get(x, y), color)
-
-    def setPixelColorRGB(self, n, red, green, blue, white = 0):
-        """Set LED at position n to the provided red, green, and blue color.
-        Each color component should be a value from 0 to 255 (where 0 is the
-        lowest intensity and 255 is the highest intensity).
-        """
-        self.strip.setPixelColor(n, Color(red, green, blue, white))
-
-    def setPixelColorXYRGB(self, x, y, red, green, blue, white = 0):
-        """Set LED at position n to the provided red, green, and blue color.
-        Each color component should be a value from 0 to 255 (where 0 is the
-        lowest intensity and 255 is the highest intensity).
-        """
-        self.strip.setPixelColor(self.pixelMatrix.get(x, y), Color(red, green, blue, white))
-
-    def setSegmentColorRGB(self, segment, red, green, blue, white = 0):
-        """Set a whole segment to the provided red, green and blue color.
-        Each color component should be a value from 0 to 255 (where 0 is the
-        lowest intensity and 255 is the highest intensity)."""
-        for n in getSegmentRange(self.SEGMENTS, segment):
-            self.strip.setPixelColor(n, Color(red, green, blue, white))
-
-    def setBrightness(self, brightness):
-        """Scale each LED in the buffer by the provided brightness.  A brightness
-        of 0 is the darkest and 255 is the brightest.
-        """
-        self.strip.setBrightness(brightness)
-
-    def getBrightness(self):
-        """Get the brightness value for each LED in the buffer. A brightness
-        of 0 is the darkest and 255 is the brightest.
-        """
-        return self.strip.getBrightness()
-
-    def getPixels(self):
-        """Return an object which allows access to the LED display data as if
-        it were a sequence of 24-bit RGB values.
-        """
-        return self.strip.getPixels()
-
-    def numPixels(self):
-        """Return the number of pixels in the display."""
-        return self.LED_COUNT
-
-    def getPixelColor(self, n):
-        """Get the 24-bit RGB color value for the LED at position n."""
-        return self.strip.getPixelColor(n)
-
-
-def Color(red, green, blue, white = 0):
-    """Convert the provided red, green, blue color to a 24-bit color value.
-    Each color component should be a value 0-255 where 0 is the lowest intensity
-    and 255 is the highest intensity.
-    """
-    return (white << 24) | (red << 16)| (green << 8) | blue
-
-def hexColor(value):
-    value = value.lstrip('#')
-    lv = len(value)
-    rgb = tuple(int(value[i:i+lv/3], 16) for i in range(0, lv, lv/3))
-    return (0 << 24) | (rgb[1] << 16) | (rgb[0] << 8) | rgb[2]