1 files changed, 275 insertions, 0 deletions
diff --git a/Common/polybar/config.ini b/Common/polybar/config.ini
new file mode 100644
index 0000000..4dff50c
--- /dev/null
+++ b/Common/polybar/config.ini
@@ -0,0 +1,275 @@
+;==========================================================
+;
+;
+;   ██████╗  ██████╗ ██╗  ██╗   ██╗██████╗  █████╗ ██████╗
+;   ██╔══██╗██╔═══██╗██║  ╚██╗ ██╔╝██╔══██╗██╔══██╗██╔══██╗
+;   ██████╔╝██║   ██║██║   ╚████╔╝ ██████╔╝███████║██████╔╝
+;   ██╔═══╝ ██║   ██║██║    ╚██╔╝  ██╔══██╗██╔══██║██╔══██╗
+;   ██║     ╚██████╔╝███████╗██║   ██████╔╝██║  ██║██║  ██║
+;   ╚═╝      ╚═════╝ ╚══════╝╚═╝   ╚═════╝ ╚═╝  ╚═╝╚═╝  ╚═╝
+;
+;
+;   To learn more about how to configure Polybar
+;   go to https://github.com/polybar/polybar
+;
+;   The README contains a lot of information
+;
+;==========================================================
+
+[colors]
+background = #282A2E
+background-alt = #373B41
+foreground = #C5C8C6
+primary = #F0C674
+secondary = #8ABEB7
+alert = #A54242
+disabled = #707880
+
+[bar/example]
+width = 100%
+height = 24pt
+radius = 6
+
+; dpi = 96
+
+background = ${colors.background}
+foreground = ${colors.foreground}
+
+line-size = 3pt
+
+border-size = 4pt
+border-color = #00000000
+
+padding-left = 0
+padding-right = 1
+
+module-margin = 1
+
+separator = |
+separator-foreground = ${colors.disabled}
+
+font-0 = monospace;2
+
+modules-left = xworkspaces 
+modules-right = pulseaudio xkeyboard memory cpu wlan eth battery date
+
+cursor-click = pointer
+cursor-scroll = ns-resize
+
+enable-ipc = true
+
+; tray-position = right
+
+; wm-restack = generic
+; wm-restack = bspwm
+; wm-restack = i3
+
+; override-redirect = true
+
+[module/bspwm]
+type = internal/bspwm
+
+; Only show workspaces defined on the same output as the bar
+; NOTE: The bspwm and XRandR monitor names must match, which they do by default.
+; But if you rename your bspwm monitors with bspc -n this option will no longer
+; behave correctly.
+; Default: true
+pin-workspaces = true
+
+; Output mode flags after focused state label
+; Default: false
+inline-mode = false
+
+; Create click handler used to focus workspace
+; Default: true
+enable-click = false
+
+; Create scroll handlers used to cycle workspaces
+; Default: true
+enable-scroll = false
+
+; Set the scroll cycle direction 
+; Default: true
+reverse-scroll = false
+
+; Use fuzzy (partial) matching on labels when assigning 
+; icons to workspaces
+; Example: code;♚ will apply the icon to all workspaces 
+; containing 'code' in the label
+; Default: false
+fuzzy-match = true
+
+; Only scroll through occupied workspaces
+; Default: false
+; New in version 3.6.0
+occupied-scroll = true
+
+[module/xworkspaces]
+type = internal/xworkspaces
+
+label-active = %name%
+label-active-background = ${colors.background-alt}
+label-active-underline= ${colors.primary}
+label-active-padding = 1
+
+label-occupied = %name%
+label-occupied-padding = 1
+
+label-urgent = %name%
+label-urgent-background = ${colors.alert}
+label-urgent-padding = 1
+
+label-empty = %name%
+label-empty-foreground = ${colors.disabled}
+label-empty-padding = 1
+
+[module/xwindow]
+type = internal/xwindow
+label = %title:0:60:...%
+
+[module/filesystem]
+type = internal/fs
+interval = 25
+
+mount-0 = /
+
+label-mounted = %{F#F0C674}%mountpoint%%{F-} %percentage_used%%
+
+label-unmounted = %mountpoint% not mounted
+label-unmounted-foreground = ${colors.disabled}
+
+[module/pulseaudio]
+type = internal/pulseaudio
+
+format-volume-prefix = "VOL "
+format-volume-prefix-foreground = ${colors.primary}
+format-volume = <label-volume>
+
+label-volume = %percentage%%
+
+label-muted = muted
+label-muted-foreground = ${colors.disabled}
+
+[module/xkeyboard]
+type = internal/xkeyboard
+blacklist-0 = num lock
+
+label-layout = %layout%
+label-layout-foreground = ${colors.primary}
+
+label-indicator-padding = 2
+label-indicator-margin = 1
+label-indicator-foreground = ${colors.background}
+label-indicator-background = ${colors.secondary}
+
+[module/memory]
+type = internal/memory
+interval = 2
+format-prefix = "RAM "
+format-prefix-foreground = ${colors.primary}
+label = %percentage_used:2%%
+
+[module/cpu]
+type = internal/cpu
+interval = 2
+format-prefix = "CPU "
+format-prefix-foreground = ${colors.primary}
+label = %percentage:2%%
+
+[network-base]
+type = internal/network
+interval = 5
+format-connected = <label-connected>
+format-disconnected = <label-disconnected>
+label-disconnected = %{F#F0C674}%ifname%%{F#707880} disconnected
+
+[module/wlan]
+inherit = network-base
+interface-type = wireless
+label-connected = %{F#F0C674}%ifname%%{F-} %essid% %local_ip%
+
+[module/eth]
+inherit = network-base
+interface-type = wired
+label-connected = %{F#F0C674}%ifname%%{F-} %local_ip%
+
+[module/date]
+type = internal/date
+interval = 1
+
+date = %H:%M
+date-alt = %Y-%m-%d %H:%M:%S
+
+label = %date%
+label-foreground = ${colors.primary}
+
+[module/battery]
+type = internal/battery
+
+; This is useful in case the battery never reports 100% charge
+; Default: 100
+full-at = 99
+
+; format-low once this charge percentage is reached
+; Default: 10
+; New in version 3.6.0
+low-at = 10
+
+; Use the following command to list batteries and adapters:
+; $ ls -1 /sys/class/power_supply/
+battery = BAT0
+adapter = ADP1
+
+; If an inotify event haven't been reported in this many
+; seconds, manually poll for new values.
+;
+; Needed as a fallback for systems that don't report events
+; on sysfs/procfs.
+;
+; Disable polling by setting the interval to 0.
+;
+; Default: 5
+poll-interval = 5
+
+label-charging = Charging %percentage%%
+
+[module/temperature]
+type = internal/temperature
+
+; Seconds to sleep between updates
+; Default: 1
+interval = 0.5
+
+; Thermal zone to use
+; To list all the zone types, run 
+; $ for i in /sys/class/thermal/thermal_zone*; do echo "$i: $(<$i/type)"; done
+; Default: 0
+thermal-zone = 0
+
+; Select thermal zone by name
+; The name has to match the contents of /sys/class/thermal/thermal_zone*/type
+; for the desired thermal zone.
+; New in version 3.7.0
+; Default: ""
+zone-type = x86_pkg_temp
+
+; Full path of temperature sysfs path
+; Use `sensors` to find preferred temperature source, then run
+; $ for i in /sys/class/hwmon/hwmon*/temp*_input; do echo "$(<$(dirname $i)/name): $(cat ${i%_*}_label 2>/dev/null || echo $(basename ${i%_*})) $(readlink -f $i)"; done
+; to find path to desired file
+; Default reverts to thermal zone setting
+hwmon-path = /sys/devices/platform/coretemp.0/hwmon/hwmon2/temp1_input
+
+; Base temperature for where to start the ramp (in degrees celsius)
+; Default: 0
+base-temperature = 20
+
+; Threshold temperature to display warning label (in degrees celsius)
+; Default: 80
+warn-temperature = 60
+
+[settings]
+screenchange-reload = true
+pseudo-transparency = false
+
+; vim:ft=dosini