1 files changed, 119 insertions, 4 deletions
diff --git a/src/compileAndRun/pythonSupportFiles/LuxcenaNeo/Strip.py b/src/compileAndRun/pythonSupportFiles/LuxcenaNeo/Strip.py
index c4ac8c9..c3a913f 100644
--- a/src/compileAndRun/pythonSupportFiles/LuxcenaNeo/Strip.py
+++ b/src/compileAndRun/pythonSupportFiles/LuxcenaNeo/Strip.py
@@ -1,6 +1,121 @@
+from neopixel import *
+from Matrix import Matrix, getSegmentRange
+
 class Strip:
 
-    def __init__(self, segments, segmentConfiguration):
-        self.segments = segments
-        self.segmentConfiguration = segmentConfiguration
-        return
+    def __init__(self, stripConf):
+        self.SEGMENTS = stripConf["segments"]
+        self.SEGMENT_CONFIG = stripConf["segment_config"]
+
+        self.LED_FREQ_HZ = stripConf["led_freq_hz"]  # LED signal frequency in hertz (usually 800khz)
+        self.LED_CHANNEL = stripConf["led_channel"]  # Set to '1' for GPIOs 13, 19, 41, 45, 53
+        self.LED_INVERT  = stripConf["led_invert"]   # True to invert the signal, (when using NPN transistor level shift)
+        self.LED_PIN     = stripConf["led_pin"]      # 18 uses PWM, 10 uses SPI /dev/spidev0.0
+        self.LED_DMA     = stripConf["led_dma"]      # DMA channel for generating the signal, on the newer ones, try 10
+        self.LED_COUNT   = sum(self.SEGMENTS)        # Number of LEDs in strip
+
+
+        self.LED_BRIGHTNESS = 255
+
+        self.strip = Adafruit_NeoPixel(
+            self.LED_COUNT,
+            self.LED_PIN,
+            self.LED_FREQ_HZ,
+            self.LED_DMA,
+            self.LED_INVERT,
+            self.LED_BRIGHTNESS,
+            self.LED_CHANNEL
+        )
+
+        self.strip.begin()
+
+        # Blank out all the LEDs
+        i = 0
+        while True:
+            self.strip.setPixelColor(i, 0)
+            i += 1
+            if (i > self.LED_COUNT): break
+        self.strip.show()
+
+        # Setup matrix
+        print("  * Generating matrix")
+        #try:
+        self.pixelMatrix = Matrix(self.SEGMENTS, stripConf["matrix"])
+        self.pixelMatrix.dump()
+        #except:
+        #    print("Something went wrong while setting up your self-defined matrix.")
+
+    def show(self):
+        """Update the display with the data from the LED buffer."""
+        self.strip.show()
+
+    def setPixelColor(self, n, color):
+        """Set LED at position n to the provided 24-bit color value (in RGB order).
+        """
+        self.strip.setPixelColor(n, color)
+
+    def setPixelColorXY(self, x, y, color):
+        """Set LED at position n to the provided 24-bit color value (in RGB order).
+        """
+        self.strip.setPixelColor(self.pixelMatrix.get(x, y), color)
+
+    def setPixelColorRGB(self, n, red, green, blue, white = 0):
+        """Set LED at position n to the provided red, green, and blue color.
+        Each color component should be a value from 0 to 255 (where 0 is the
+        lowest intensity and 255 is the highest intensity).
+        """
+        self.strip.setPixelColor(n, Color(red, green, blue, white))
+
+    def setPixelColorXYRGB(self, x, y, red, green, blue, white = 0):
+        """Set LED at position n to the provided red, green, and blue color.
+        Each color component should be a value from 0 to 255 (where 0 is the
+        lowest intensity and 255 is the highest intensity).
+        """
+        self.strip.setPixelColor(self.pixelMatrix.get(x, y), Color(red, green, blue, white))
+
+    def setSegmentColorRGB(self, segment, red, green, blue, white = 0):
+        """Set a whole segment to the provided red, green and blue color.
+        Each color component should be a value from 0 to 255 (where 0 is the
+        lowest intensity and 255 is the highest intensity)."""
+        for n in getSegmentRange(self.SEGMENTS, segment):
+            self.strip.setPixelColor(n, Color(red, green, blue, white))
+
+    def setBrightness(self, brightness):
+        """Scale each LED in the buffer by the provided brightness.  A brightness
+        of 0 is the darkest and 255 is the brightest.
+        """
+        self.strip.setBrightness(brightness)
+
+    def getBrightness(self):
+        """Get the brightness value for each LED in the buffer. A brightness
+        of 0 is the darkest and 255 is the brightest.
+        """
+        return self.strip.getBrightness()
+
+    def getPixels(self):
+        """Return an object which allows access to the LED display data as if
+        it were a sequence of 24-bit RGB values.
+        """
+        return self.strip.getPixels()
+
+    def numPixels(self):
+        """Return the number of pixels in the display."""
+        return self.LED_COUNT
+
+    def getPixelColor(self, n):
+        """Get the 24-bit RGB color value for the LED at position n."""
+        return self.strip.getPixelColor(n)
+
+
+def Color(red, green, blue, white = 0):
+    """Convert the provided red, green, blue color to a 24-bit color value.
+    Each color component should be a value 0-255 where 0 is the lowest intensity
+    and 255 is the highest intensity.
+    """
+    return (white << 24) | (red << 16)| (green << 8) | blue
+
+def hexColor(value):
+    value = value.lstrip('#')
+    lv = len(value)
+    rgb = tuple(int(value[i:i+lv/3], 16) for i in range(0, lv, lv/3))
+    return (0 << 24) | (rgb[1] << 16) | (rgb[0] << 8) | rgb[2]