Remove unused stuff

26 files changed, 0 insertions, 3020 deletions

diff --git a/linux/bspwm/bspwmrc b/linux/bspwm/bspwmrc
deleted file mode 100755
index 717e1e5..0000000
--- a/linux/bspwm/bspwmrc
+++ /dev/null
@@ -1,39 +0,0 @@
-#! /bin/sh
-
-pgrep -x sxhkd > /dev/null || sxhkd &
-
-#compton --backend glx --vsync opengl-swc &
-compton &
-nitrogen --restore &
-polybar &
-
-bspc monitor -d I II III IV V VI VII VIII IX X
-
-bspc config border_width         2
-bspc config window_gap           3
-
-bspc config split_ratio          0.52
-bspc config borderless_monocle   true
-bspc config gapless_monocle      true
-
-bspc config focus_follows_pointer   true
-
-bspc config automatic_scheme     longest_side
-bspc config single_monocle       true
-
-bspc rule -a Gimp desktop='^8' state=floating follow=on
-bspc rule -a mplayer2 state=floating
-bspc rule -a Kupfer.py focus=on
-bspc rule -a Screenkey manage=off
-
-# Floating Apps
-declare -a floatingApps=(xdman-Main Lxappearance Nextcloud Gparted Thunar \ 
-Viewnior Xarchiver Pavucontrol firefox:Dialog \
-firefox:Pop-up nitrogen Gpick)
-for i in ${floatingApps[@]}; do
-    bspc rule -a $i state=floating focus=on follow=on; done
-
-declare -a floatingCust=(*:*:Picture-in-picture *:Toolkit:Picture-in-Picture mpv)
-for i in ${floatingCust[@]}; do
-	bspc rule -a $i state=floating sticky=on follow=off focus=on \
-    rectangle=500x300+1366+50; done
diff --git a/linux/deadd/deadd.conf b/linux/deadd/deadd.conf
deleted file mode 100644
index e69de29..0000000
--- a/linux/deadd/deadd.conf
+++ /dev/null
diff --git a/linux/foot/foot.ini b/linux/foot/foot.ini
deleted file mode 100644
index 6959986..0000000
--- a/linux/foot/foot.ini
+++ /dev/null
@@ -1,205 +0,0 @@
-# -*- conf -*-
-
-# shell=$SHELL (if set, otherwise user's default shell from /etc/passwd)
-# term=foot (or xterm-256color if built with -Dterminfo=disabled)
-term=xterm-256color
-# login-shell=no
-
-# app-id=foot
-# title=foot
-# locked-title=no
-
-#font=monospace:size=11
-font=RobotoMono Nerd Font Mono:size=10
-#font=Source Code Pro for Powerline:size=10
-
-# font-bold=<bold variant of regular font>
-# font-italic=<italic variant of regular font>
-# font-bold-italic=<bold+italic variant of regular font>
-# line-height=<font metrics>
-# letter-spacing=0
-# horizontal-letter-offset=0
-# vertical-letter-offset=0
-# underline-offset=<font metrics>
-# box-drawings-uses-font-glyphs=no
-dpi-aware=no
-
-# initial-window-size-pixels=700x500  # Or,
-# initial-window-size-chars=<COLSxROWS>
-# initial-window-mode=windowed
-pad=0x0 center                            # optionally append 'center'
-# resize-delay-ms=100
-
-# notify=notify-send -a ${app-id} -i ${app-id} ${title} ${body}
-
-# bold-text-in-bright=no
-# word-delimiters=,│`|:"'()[]{}<>
-# selection-target=primary
-# workers=<number of logical CPUs>
-
-[bell]
-# urgent=no
-# notify=no
-# command=
-# command-focused=no
-
-[scrollback]
-# lines=1000
-# multiplier=3.0
-# indicator-position=relative
-# indicator-format=
-
-[url]
-# launch=xdg-open ${url}
-# label-letters=sadfjklewcmpgh
-# osc8-underline=url-mode
-# protocols=http, https, ftp, ftps, file, gemini, gopher
-# uri-characters=abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789-_.,~:;/?#@!$&%*+="'
-
-[cursor]
-# style=block
-# color=111111 dcdccc
-# blink=no
-# beam-thickness=1.5
-# underline-thickness=<font underline thickness>
-
-[mouse]
-# hide-when-typing=no
-# alternate-scroll-mode=yes
-
-[colors]
-alpha=1
-
-background= eeeeee
-foreground= 000000
-
-regular0  = 24292f
-regular1  = cf222e
-regular2  = 116329
-regular3  = 4d2d00
-regular4  = 0969da
-regular5  = 8250df
-regular6  = 1b7c83
-regular7  = 6e7781
-
-bright0   = 57606a
-bright1   = a40e26
-bright2   = 00d700
-bright3   = fcfc62
-bright4   = 0000ff
-bright5   = a475f9
-bright6   = 3192aa
-bright7   = 8c959f
-
-# foreground=dcdccc
-# background=111111
-
-## Normal/regular colors (color palette 0-7)
-# regular0=222222  # black
-# regular1=cc9393  # red
-# regular2=7f9f7f  # green
-# regular3=d0bf8f  # yellow
-# regular4=6ca0a3  # blue
-# regular5=dc8cc3  # magenta
-# regular6=93e0e3  # cyan
-# regular7=dcdccc  # white
-
-## Bright colors (color palette 8-15)
-# bright0=666666   # bright black
-# bright1=dca3a3   # bright red
-# bright2=bfebbf   # bright green
-# bright3=f0dfaf   # bright yellow
-# bright4=8cd0d3   # bright blue
-# bright5=fcace3   # bright magenta
-# bright6=b3ffff   # bright cyan
-# bright7=ffffff   # bright white
-
-## dimmed colors (see foot.ini(5) man page)
-# dim0=<not set>
-# ...
-# dim7=<not-set>
-
-## The remaining 256-color palette
-# 16 = <256-color palette #16>
-# ...
-# 255 = <256-color palette #255>
-
-## Misc colors
-# selection-foreground=<inverse foreground/background>
-# selection-background=<inverse foreground/background>
-# jump-labels=<regular0> <regular3>
-# urls=<regular3>
-# scrollback-indicator=<regular0> <bright4>
-
-[csd]
-# preferred=server
-# size=26
-# font=<primary font>
-# color=<foreground color>
-border-width=0
-# border-color=<csd.color>
-# button-width=26
-# button-color=<background color>
-# button-minimize-color=<regular4>
-# button-maximize-color=<regular2>
-# button-close-color=<regular1>
-
-[key-bindings]
-# scrollback-up-page=Shift+Page_Up
-# scrollback-up-half-page=none
-# scrollback-up-line=none
-# scrollback-down-page=Shift+Page_Down
-# scrollback-down-half-page=none
-# scrollback-down-line=none
-clipboard-copy=Mod1+c XF86Copy
-clipboard-paste=Mod1+v XF86Paste
-# primary-paste=Shift+Insert
-# search-start=Control+Shift+r
-# font-increase=Control+plus Control+equal Control+KP_Add
-# font-decrease=Control+minus Control+KP_Subtract
-# font-reset=Control+0 Control+KP_0
-# spawn-terminal=Control+Shift+n
-# minimize=none
-# maximize=none
-# fullscreen=none
-# pipe-visible=[sh -c "xurls | fuzzel | xargs -r firefox"] none
-# pipe-scrollback=[sh -c "xurls | fuzzel | xargs -r firefox"] none
-# pipe-selected=[xargs -r firefox] none
-# show-urls-launch=Control+Shift+u
-# show-urls-copy=none
-# noop=none
-
-[search-bindings]
-# cancel=Control+g Control+c Escape
-# commit=Return
-# find-prev=Control+r
-# find-next=Control+s
-# cursor-left=Left Control+b
-# cursor-left-word=Control+Left Mod1+b
-# cursor-right=Right Control+f
-# cursor-right-word=Control+Right Mod1+f
-# cursor-home=Home Control+a
-# cursor-end=End Control+e
-# delete-prev=BackSpace
-# delete-prev-word=Mod1+BackSpace Control+BackSpace
-# delete-next=Delete
-# delete-next-word=Mod1+d Control+Delete
-# extend-to-word-boundary=Control+w
-# extend-to-next-whitespace=Control+Shift+w
-# clipboard-paste=Control+v Control+y
-# primary-paste=Shift+Insert
-
-[url-bindings]
-# cancel=Control+g Control+c Control+d Escape
-# toggle-url-visible=t
-
-[mouse-bindings]
-# selection-override-modifiers=Shift
-# primary-paste=BTN_MIDDLE
-# select-begin=BTN_LEFT
-# select-begin-block=Control+BTN_LEFT
-# select-extend=BTN_RIGHT
-# select-extend-character-wise=Control+BTN_RIGHT
-# select-word=BTN_LEFT-2
-# select-word-whitespace=Control+BTN_LEFT-2
-# select-row=BTN_LEFT-3
diff --git a/linux/i3/Xresources b/linux/i3/Xresources
deleted file mode 100755
index ffd6974..0000000
--- a/linux/i3/Xresources
+++ /dev/null
@@ -1,184 +0,0 @@
-! ------------------------------------------------------------------------------
-! Colour Configuration
-! ------------------------------------------------------------------------------
-
-! special
-!*.foreground:   #d8dee8
-*.foreground:   #e5e9f0
-!*.background:   #2f343f
-*.background:   #121212
-*.cursorColor:  #b48ead
-
-! black
-*.color0  : #121212
-!*.color0  : #4b5262
-!*.color8  : #000000
-*.color8  : #434a5a
-
-! red
-*.color1  : #bf616a
-*.color9  : #b3555e
-
-! green
-*.color2  : #a3be8c
-*.color10 : #93ae7c
-
-! yellow
-*.color3  : #ebcb8b
-*.color11 : #dbbb7b
-
-! blue
-*.color4  : #81a1c1
-*.color12 : #7191b1
-
-! magenta
-*.color5  : #b48ead
-*.color13 : #a6809f
-
-! cyan
-*.color6  : #89d0bA
-*.color14 : #7dbba8
-
-! white
-*.color7  : #e5e9f0
-*.color15 : #d1d5dc
-
-
-! -----------
-! Light theme
-! -----------
-!! *.foreground:  #3b2322
-!! *.background:  #dfdbc3
-!! *.cursorColor: #73635a
-!! !
-!! ! Black
-!! *.color0:      #000000
-!! *.color8:      #808080
-!! !
-!! ! Red
-!! *.color1:      #cc0000
-!! *.color9:      #cc0000
-!! !
-!! ! Green
-!! *.color2:      #009600
-!! *.color10:     #009600
-!! !
-!! ! Yellow
-!! *.color3:      #d06b00
-!! *.color11:     #d06b00
-!! !
-!! ! Blue
-!! *.color4:      #0000cc
-!! *.color12:     #0000cc
-!! !
-!! ! Magenta
-!! *.color5:      #cc00cc
-!! *.color13:     #cc00cc
-!! !
-!! ! Cyan
-!! *.color6:      #0087cc
-!! *.color14:     #0087cc
-!! !
-!! ! White
-!! *.color7:      #cccccc
-!! *.color15:     #ffffff
-!! !
-!! ! Bold, Italic, Underline
-!! *.colorBD:     #8e2a19
-!! !*.colorIT:
-!! !*.colorUL:
-
-
-! ------------------------------------------------------------------------------
-! Font configuration
-! ------------------------------------------------------------------------------
-
-!URxvt*font:				xft:RobotoMono\ Nerd\ Font\ Mono:size=10
-!URxvt*boldFont:			xft:RobotoMono\ Nerd\ Font\ Mono:size=10
-!URxvt*italicFont:		xft:RobotoMono\ Nerd\ Font\ Mono:size=10
-!URxvt*boldItalicFont:	xft:RobotoMono\ Nerd\ Font\ Mono:size=10
-URxvt*font:				xft:Sauce\ Code\ Pro\ Nerd\ Font\ Mono:size=10,xft:Source Code Pro Semibold:size=10,xft:Noto Mono:size=10,xft:Symbola:size=10
-URxvt*boldFont:			xft:Sauce\ Code\ Pro\ Nerd\ Font\ Mono:size=10,xft:Source Code Pro Semibold:size=10,xft:Noto Mono:size=10,xft:Symbola:size=10
-URxvt*italicFont:		xft:Sauce\ Code\ Pro\ Nerd\ Font\ Mono:size=10,xft:Source Code Pro Semibold:size=10,xft:Noto Mono:size=10,xft:Symbola:size=10
-URxvt*boldItalicFont:	xft:Sauce\ Code\ Pro\ Nerd\ Font\ Mono:size=10,xft:Source Code Pro Semibold:size=10,xft:Noto Mono:size=10,xft:Symbola:size=10
-
-! ------------------------------------------------------------------------------
-! Xft Font Configuration
-! ------------------------------------------------------------------------------
-
-Xft.autohint: 0
-Xft.lcdfilter: lcddefault
-Xft.hintstyle: hintslight
-Xft.hinting: 1
-Xft.antialias: 1
-Xft.rgba: rgb
-
-! ------------------------------------------------------------------------------
-! URxvt configs
-! ------------------------------------------------------------------------------
-
-! font spacing
-URxvt*letterSpace:		0
-URxvt.lineSpace:		0
-
-! general settings
-URxvt*saveline:			15000
-URxvt*termName:			rxvt-256color
-URxvt*iso14755:			false
-URxvt*urgentOnBell:		true
-
-! appearance
-URxvt*depth:			0
-URxvt*scrollBar:		false
-URxvt*scrollBar_right:	false
-URxvt*internalBorder:	0
-URxvt*externalBorder:	0
-URxvt.geometry:			84x22
-
-! perl extensions
-URxvt.perl-ext-common:	default,clipboard,url-select,resize-font,keyboard-select
-
-! macros for clipboard and selection
-URxvt.copyCommand:		xclip -i -selection clipboard
-URxvt.pasteCommand:		xclip -o -selection clipboard
-URxvt.keysym.M-c:		perl:clipboard:copy
-URxvt.keysym.M-v:		perl:clipboard:paste
-URxvt.keysym.M-C-v:		perl:clipboard:paste_escaped
-URxvt.keysym.M-Escape:	perl:keyboard-select:activate
-URxvt.keysym.M-s:		perl:keyboard-select:search
-URxvt.keysym.M-u:		perl:url-select:select_next
-URxvt.urlLauncher:		firefox
-URxvt.underlineURLs:	true
-URxvt.urlButton:		1
-
-! scroll one line
-URxvt.keysym.Shift-Up:		command:\033]720;1\007
-URxvt.keysym.Shift-Down:	command:\033]721;1\007
-
-! control arrow
-URxvt.keysym.Control-Up:	\033[1;5A
-URxvt.keysym.Control-Down:	\033[1;5B
-URxvt.keysym.Control-Right:	\033[1;5C
-URxvt.keysym.Control-Left:	\033[1;5D
-
-! ------------------------------------------------------------------------------
-! Rofi configs
-! ------------------------------------------------------------------------------
-
-rofi.color-enabled: true
-rofi.color-window: #2e3440, #f0d48b, #2e3440
-rofi.color-normal: #2e3440, #d8dee9, #2e3440, #2e3440, #bf616a
-rofi.color-active: #2e3440, #b48ead, #2e3440, #2e3440, #93e5cc
-rofi.color-urgent: #2e3440, #ebcb8b, #2e3440, #2e3440, #ebcb8b
-rofi.bw: 2
-rofi.modi: run,drun,window
-
-! ------------------------------------------------------------------------------
-! Dmenu configs
-! ------------------------------------------------------------------------------
-
-dmenu.selforeground:	    #d8dee9
-dmenu.background:	        #2e3440
-dmenu.selbackground:	    #bf616a
-dmenu.foreground:	        #d8dee9
-
diff --git a/linux/i3/config/compton.conf b/linux/i3/config/compton.conf
deleted file mode 100755
index 1062499..0000000
--- a/linux/i3/config/compton.conf
+++ /dev/null
@@ -1,59 +0,0 @@
-## shadow
-#shadow = true;
-#no-dnd-shadow = true;
-#no-dock-shadow = true;
-#clear-shadow = true;
-#shadow-radius = 12;
-#shadow-offset-x = -12;
-#shadow-offset-y = -12;
-#shadow-opacity = 0.95;
-#shadow-red = 0.18;
-#shadow-green = 0.20;
-#shadow-blue = 0.25;
-#shadow-exclude = [ "class_g = 'Cairo-clock'" ,
-#	"class_g = 'CoverGloobus'",
-#	"class_g = 'Tilda'",
-#	"class_g = 'Conky'",
-#	"class_g ?= 'Notify-osd'",
-#	"class_g = 'Firefox'",
-#	"class_g = 'Firefox-esr'",
-#	"class_g = 'Dmenu'",
-#	"name = 'Notification'",
-#	"_GTK_FRAME_EXTENTS@:c"
-#];
-
-## fading
-#fading = true;
-#fade-delta = 0.25;
-#fade-in-step = 0.02;
-#fade-out-step = 0.02;
-#fade-exclude = [
-#];
-
-## other
-#backend = "xrender";
-backend = "glx";
-vsync = "opengl-swc";
-glx-no-stencil = true;
-mark-wmwin-focused = true;
-mark-ovredir-focused = true;
-detect-rounded-corners = true;
-#detect-client-opacity = true;
-refresh-rate = 0;
-dbe = false;
-paint-on-overlay = true;
-#focus-exclude = [ "class_g = 'Cairo-clock'" ,
-#	"class_g = 'CoverGloobus'",
-#	"class_g = 'Tilda'",
-#	"class_g = 'Firefox'",
-#	"class_g = 'Firefox-esr'"
-#];
-#detect-transient = true;
-#detect-client-leader = true;
-#invert-color-include = [ ];
-#glx-copy-from-front = false;
-#glx-swap-method = "undefined";
-#wintypes:
-#{
-#  tooltip = { fade = true; shadow = true; opacity = 0.75; focus = true; };
-#};
diff --git a/linux/i3/config/dunst/dunstrc b/linux/i3/config/dunst/dunstrc
deleted file mode 100755
index 5df67b7..0000000
--- a/linux/i3/config/dunst/dunstrc
+++ /dev/null
@@ -1,52 +0,0 @@
-[global]
-monitor = 0
-follow = mouse
-geometry = "250x50-24+24"
-indicate_hidden = yes
-shrink = no
-separator_height = 0
-padding = 16
-horizontal_padding = 24
-frame_width = 2
-sort = no
-idle_threshold = 120
-font = Noto Sans 8
-line_height = 4
-markup = full
-format = "<b>%s</b>\n%b"
-alignment = left
-show_age_threshold = 60
-word_wrap = yes
-ignore_newline = no
-stack_duplicates = false
-hide_duplicate_count = yes
-show_indicators = no
-icon_position = off
-sticky_history = yes
-history_length = 20
-browser = /usr/bin/firefox -new-tab
-always_run_script = true
-title = Dunst
-class = Dunst
-
-[shortcuts]
-close = ctrl+space
-close_all = ctrl+shift+space
-history = ctrl+grave
-context = ctrl+shift+period
-
-[urgency_low]
-background = "#2f343f"
-foreground = "#d8dee8"
-timeout = 2
-
-[urgency_normal]
-background = "#2f343f"
-foreground = "#d8dee8"
-timeout = 4
-
-[urgency_critical]
-background = "#2f343f"
-foreground = "#d8dee8"
-frame_color = "#bf616a"
-timeout = 0
diff --git a/linux/i3/config/i3/config b/linux/i3/config/i3/config
deleted file mode 100644
index a2b7df6..0000000
--- a/linux/i3/config/i3/config
+++ /dev/null
@@ -1,200 +0,0 @@
-# set modifier
-set $super Mod4
-set $alt Mod1
-
-# set font
-font pango: Noto Sans 8
-
-# Use Mouse+$super to drag floating windows to their wanted position
-floating_modifier $super
-
-#autostart
-#exec --no-startup-id hsetroot -center ~/.wallpaper.png
-#exec --no-startup-id feh --bg-scale ~/.wallpaper.png
-exec --no-startup-id wallpaper.sh
-exec --no-startup-id compton --xrender-sync-fence --xrender-sync -b
-exec --no-startup-id /usr/lib/gsd-xsettings
-exec_always --no-startup-id gnome-power-manager
-exec --no-startup-id gnome-flashback
-
-exec --no-startup-id "~/.config/umon/wallpaper.sh"
-
-# Tru to run autosetup of displays
-exec --no-startup-id xrandr --auto
-# Start umonitor daemon
-#exec --no-startup-id umonitor --listen
-
-
-# Start nm-applet for network things :)
-exec --no-startup-id nm-applet
-exec --no-startup-id blueman-applet
-exec --no-startup-id i3-battery-popup -n
-exec --no-startup-id deadd-notification-center
-
-# start a terminal
-bindsym $super+Return exec urxvt
-bindsym $super+Alt+Return exec urxvt --name floating -e noemutt
-
-# Shortcut to tt gui
-bindsym $super+Shift+Return exec /home/jakob/.local/bin/tt-g
-
-# start dmenu (a program launcher)
-bindsym $super+Shift+d exec i3-dmenu-desktop --dmenu="dmenu -i -fn 'Noto Sans:size=8'"
-bindsym $super+d exec rofi -lines 12 -padding 18 -width 60 -location 0 -show drun -sidebar-mode -columns 3 -font 'Noto Sans 8'
-
-# change volume
-bindsym XF86AudioRaiseVolume exec amixer -q set Master 2%+
-bindsym XF86AudioLowerVolume exec amixer -q set Master 2%-
-bindsym XF86AudioMute exec amixer set Master toggle
-bindsym XF86AudioMicMute exec amixer set Capture toggle
-
-# music control
-#bindsym XF86AudioNext exec mpc next
-#bindsym XF86AudioPrev exec mpc prev
-#bindsym XF86AudioPlay exec mpc toggle
-#bindsym XF86AudioStop exec mpc stop
-
-# kill focused window
-bindsym $alt+F4 kill
-
-# change focus
-bindsym $super+Left focus left
-bindsym $super+Down focus down
-bindsym $super+Up focus up
-bindsym $super+Right focus right
-focus_follows_mouse no
-
-# move focused window
-bindsym $super+Shift+Left move left
-bindsym $super+Shift+Down move down
-bindsym $super+Shift+Up move up
-bindsym $super+Shift+Right move right
-
-# split in horizontal orientation
-bindsym $super+h split h
-
-# split in vertical orientation
-bindsym $super+v split v
-
-# enter fullscreen mode for the focused container
-bindsym $super+f fullscreen toggle
-
-# change container layout split
-bindsym $super+s layout toggle split
-
-# toggle tiling / floating
-bindsym $super+space floating toggle
-
-# change focus between tiling / floating windows
-bindsym $super+Shift+space focus mode_toggle
-
-# switch to workspace
-bindsym $alt+Control+Right workspace next
-bindsym $alt+Control+Left workspace prev
-bindsym $super+1 workspace 1
-bindsym $super+2 workspace 2
-bindsym $super+3 workspace 3
-bindsym $super+4 workspace 4
-bindsym $super+5 workspace 5
-bindsym $super+6 workspace 6
-bindsym $super+7 workspace 7
-bindsym $super+8 workspace 8
-bindsym $super+9 workspace 9
-
-# move focused container to workspace
-bindsym $super+Shift+1 move container to workspace 1
-bindsym $super+Shift+2 move container to workspace 2
-bindsym $super+Shift+3 move container to workspace 3
-bindsym $super+Shift+4 move container to workspace 4
-bindsym $super+Shift+5 move container to workspace 5
-bindsym $super+Shift+6 move container to workspace 6
-bindsym $super+Shift+7 move container to workspace 7
-bindsym $super+Shift+8 move container to workspace 8
-bindsym $super+Shift+9 move container to workspace 9
-
-# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
-bindsym $super+Shift+r restart
-
-# exit i3
-#bindsym $super+l exec i3lock -f -c 63bfb6 #-i /home/jakob/.lockscreen.png
-bindsym $super+l exec dbus-send --type=method_call --dest=org.gnome.ScreenSaver /org/gnome/ScreenSaver org.gnome.ScreenSaver.Lock
-bindsym $super+Shift+e exec "i3-nagbar -t warning -m 'Really, exit?' -b 'Yes' 'i3-msg exit'"
-bindsym $super+p exec --no-startup-id /home/jakob/.config/rofi/bin/applet_powermenu
-
-# resize window (you can also use the mouse for that)
-mode "resize" {
-        bindsym Left resize shrink width 5 px or 5 ppt
-        bindsym Down resize grow height 5 px or 5 ppt
-        bindsym Up resize shrink height 5 px or 5 ppt
-        bindsym Right resize grow width 5 px or 5 ppt
-        bindsym Return mode "default"
-}
-bindsym $super+r mode "resize"
-
-# Colors
-set $blue #1b1e26
-set $yellow #f0d48b
-set $grey #b0b287
-set $green #789073
-
-# panel
-bar {
-        colors {
-        #background #2f343f
-        statusline #2f343f
-        separator #4b5262
-
-        background $blue
-        #statusline $yellow
-        #separator  $green
-
-        # colour of border, background, and text
-        #focused_workspace       #2f343f #bf616a #d8dee8
-        #active_workspace        #2f343f #2f343f #d8dee8
-        #inactive_workspace      #2f343f #2f343f #d8dee8
-        #urgent_workspacei       #2f343f #ebcb8b #2f343f
-        focused_workspace       $blue $blue $yellow
-        active_workspace        $blue $blue $yellow
-        inactive_workspace      $blue $blue $green
-        urgent_workspacei       $blue $blue $grey
-    }
-        status_command i3status 
-}
-
-# window rules, you can find the window class using xprop
-for_window [class="^.*"] border pixel 2
-for_window [class=Viewnior|feh|Audacious|File-roller|Lxappearance|Lxtask|Pavucontrol|Arandr|Nitrogen|Nautilus|Eog|gnome-calculator|Thunar|gnome-system-monitor] floating enable
-for_window [class=URxvt|Firefox|Geany|Evince|Soffice|libreoffice*|mpv|Ghb|Xfburn|Gimp*|Inkscape|Vlc|Lxappearance|Audacity|Nautilus|Eog|gnome-calculator|Thunar] focus
-for_window [class=Xfburn|GParted|System-config-printer.py|Lxtask|Pavucontrol|Exo-helper*|Lxrandr|Arandr|Nitrogen] focus
-for_window [ instance="floating" ] floating enable
-
-# colour of border, background, text, indicator, and child_border
-#client.focused              #bf616a #2f343f3 #d8dee8 #bf616a #d8dee8
-#client.focused_inactive     #2f343f #2f343f #d8dee8 #2f343f #2f343f
-#client.unfocused            #2f343f #2f343f #d8dee8 #2f343f #2f343f
-#client.urgent               #2f343f #2f343f #d8dee8 #2f343f #2f343f
-#client.placeholder          #2f343f #2f343f #d8dee8 #2f343f #2f343f
-#client.background           #2f343f
-client.focused           #d1ae54 $blue $yellow $yellow #d1ae54
-client.focused_inactive  #d1ae54 $blue $grey   $yellow $yellow
-client.unfocused         $yellow $blue $grey   $yellow $yellow
-client.urgent            $yellow $blue $yellow $yellow $yellow
-client.placeholder       $yellow $blue $yellow $yellow $yellow
-client.background        $blue
-
-# i3-gaps
-gaps inner 7
-
-# Keybinds for lenovo x1 carbon
-bindsym XF86MonBrightnessUp exec --no-startup-id "/home/jakob/bin/brightness-popup.sh inc"
-bindsym XF86MonBrightnessDown exec --no-startup-id "/home/jakob/bin/brightness-popup.sh dec"
-
-bindsym XF86Display exec --no-startup-id "arandr"
-bindsym Print exec --no-startup-id "gnome-screenshot --interactive"
-bindsym XF86Favorites exec --no-startup-id "kill -s USR1 $(pidof deadd-notification-center)"
-
-# Keybinds for switching keyboard layout
-#bindsym $super+Shift+F1 exec setxkbmap -layout no; notify-send.py "Keyboard layout NO"
-#bindsym $super+Shift+F2 exec setxkbmap -layout gb; notify-send.py "Keyboard layout EN"
-bindsym $super+Shift+F1 exec "/home/jakob/bin/kblayout.sh no"
-bindsym $super+Shift+F2 exec "/home/jakob/bin/kblayout.sh us"
diff --git a/linux/i3/config/i3status/config b/linux/i3/config/i3status/config
deleted file mode 100644
index b129807..0000000
--- a/linux/i3/config/i3status/config
+++ /dev/null
@@ -1,74 +0,0 @@
-general {
-        output_format = "i3bar"
-        colors = false
-        markup = pango
-        interval = 5
-        color_good = '#2f343f'
-		color_degraded = '#ebcb8b'
-		color_bad = '#ba5e57'
-}
-
-order += "load"
-order += "cpu_temperature 0"
-#order += "disk /"
-#order += "disk /home"
-#order += "ethernet enp1s0"
-order += "wireless wlp0s20f3"
-order += "volume master"
-order += "battery 0"
-order += "tztime local"
-
-load {
-        format = "<span background='#f59335'>  %5min Load </span>"
-}
-
-cpu_temperature 0 {
-        format = "<span background='#bf616a'>  %degrees °C </span>"
-        path = "/sys/class/thermal/thermal_zone0/temp"
-}
-
-disk "/" {
-        format = "<span background='#fec7cd'>  %free Free </span>"
-}
-
-disk "/home" {
-        format = "<span background='#a1d569'>  %free Free </span>"
-}
-
-ethernet enp1s0 {
-        format_up = "<span background='#88c0d0'>  %ip </span>"
-        format_down = "<span background='#88c0d0'>  Disconnected </span>"
-}
-
-wireless wlp0s20f3 {
-        format_up = "<span background='#b48ead'>  %essid </span>"
-        format_down = "<span background='#b48ead'>  Disconnected </span>"
-}
-
-volume master {
-        format = "<span background='#ebcb8b'>  %volume </span>"
-        format_muted = "<span background='#ebcb8b'>  Muted </span>"
-        device = "default"
-        mixer = "Master"
-        mixer_idx = 0
-}
-
-battery 0 {
-	last_full_capacity = true
-        format = "<span background='#a3be8c'>  %status %percentage </span>"
-        format_down = "No Battery"
-        status_chr = "Charging"
-        status_bat = "Battery"
-        status_unk = "Unknown"
-        status_full = "Charged"
-        path = "/sys/class/power_supply/BAT%d/uevent"
-        low_threshold = 10
-        #on_click 1 = "exec --no-startup-id ~/.config/rofi/bin/applet_battery"
-}
-
-tztime local {
-		#format = "<span background='#81a1c1'> %time </span>"
-		#format_time = " %a %-d %b %H:%M"
-		format = "<span background='#81a1c1'>  %a %-d %b %H:%M </span>"
-}
-
diff --git a/linux/i3/urxvt/ext/clipboard b/linux/i3/urxvt/ext/clipboard
deleted file mode 100755
index 05e1601..0000000
--- a/linux/i3/urxvt/ext/clipboard
+++ /dev/null
@@ -1,115 +0,0 @@
-#! perl -w
-# Author:   Bert Muennich
-# Website:  http://www.github.com/muennich/urxvt-perls
-# License:  GPLv2
-
-# Use keyboard shortcuts to copy the selection to the clipboard and to paste
-# the clipboard contents (optionally escaping all special characters).
-# Requires xsel to be installed!
-
-# Usage: put the following lines in your .Xdefaults/.Xresources:
-#   URxvt.perl-ext-common: ...,clipboard
-#   URxvt.keysym.M-c:   perl:clipboard:copy
-#   URxvt.keysym.M-v:   perl:clipboard:paste
-#   URxvt.keysym.M-C-v: perl:clipboard:paste_escaped
-
-# Options:
-#   URxvt.clipboard.autocopy: If true, PRIMARY overwrites clipboard
-
-# You can also overwrite the system commands to use for copying/pasting.
-# The default ones are:
-#   URxvt.clipboard.copycmd:  xsel -ib
-#   URxvt.clipboard.pastecmd: xsel -ob
-# If you prefer xclip, then put these lines in your .Xdefaults/.Xresources:
-#   URxvt.clipboard.copycmd:  xclip -i -selection clipboard
-#   URxvt.clipboard.pastecmd: xclip -o -selection clipboard
-# On Mac OS X, put these lines in your .Xdefaults/.Xresources:
-#   URxvt.clipboard.copycmd:  pbcopy
-#   URxvt.clipboard.pastecmd: pbpaste
-
-# The use of the functions should be self-explanatory!
-
-use strict;
-
-sub on_start {
-	my ($self) = @_;
-
-	$self->{copy_cmd} = $self->x_resource('clipboard.copycmd') || 'xsel -ib';
-	$self->{paste_cmd} = $self->x_resource('clipboard.pastecmd') || 'xsel -ob';
-
-	if ($self->x_resource('clipboard.autocopy') eq 'true') {
-		$self->enable(sel_grab => \&sel_grab);
-	}
-
-	()
-}
-
-sub copy {
-	my ($self) = @_;
-
-	if (open(CLIPBOARD, "| $self->{copy_cmd}")) {
-		my $sel = $self->selection();
-		utf8::encode($sel);
-		print CLIPBOARD $sel;
-		close(CLIPBOARD);
-	} else {
-		print STDERR "error running '$self->{copy_cmd}': $!\n";
-	}
-
-	()
-}
-
-sub paste {
-	my ($self) = @_;
-
-	my $str = `$self->{paste_cmd}`;
-	if ($? == 0) {
-		$self->tt_paste($str);
-	} else {
-		print STDERR "error running '$self->{paste_cmd}': $!\n";
-	}
-
-	()
-}
-
-sub paste_escaped {
-	my ($self) = @_;
-
-	my $str = `$self->{paste_cmd}`;
-	if ($? == 0) {
-		$str =~ s/([!#\$%&\*\(\) ='"\\\|\[\]`~,<>\?])/\\\1/g;
-		$self->tt_paste($str);
-	} else {
-		print STDERR "error running '$self->{paste_cmd}': $!\n";
-	}
-
-	()
-}
-
-sub on_action {
-    my ($self, $action) = @_;
-
-    on_user_command($self, "clipboard:" . $action);
-}
-
-sub on_user_command {
-	my ($self, $cmd) = @_;
-
-	if ($cmd eq "clipboard:copy") {
-	   $self->copy;
-	} elsif ($cmd eq "clipboard:paste") {
-	   $self->paste;
-	} elsif ($cmd eq "clipboard:paste_escaped") {
-	   $self->paste_escaped;
-	}
-
-	()
-}
-
-sub sel_grab {
-	my ($self) = @_;
-
-	$self->copy;
-
-	()
-}
diff --git a/linux/i3/urxvt/ext/keyboard-select b/linux/i3/urxvt/ext/keyboard-select
deleted file mode 100755
index 78d4a7f..0000000
--- a/linux/i3/urxvt/ext/keyboard-select
+++ /dev/null
@@ -1,597 +0,0 @@
-#! perl -w
-# Author:   Bert Muennich
-# Website:  http://www.github.com/muennich/urxvt-perls
-# License:  GPLv2
-
-# Use keyboard shortcuts to select and copy text.
-
-# Usage: put the following lines in your .Xdefaults/.Xresources:
-#   URxvt.perl-ext-common: ...,keyboard-select
-#   URxvt.keysym.M-Escape: perl:keyboard-select:activate
-# The following line overwrites the default Meta-s binding and allows to
-# activate keyboard-select directly in backward search mode:
-#   URxvt.keysym.M-s: perl:keyboard-select:search
-
-# Use Meta-Escape to activate selection mode, then use the following keys:
-#   h/j/k/l:    Move cursor left/down/up/right (also with arrow keys)
-#   g/G/0/^/$/H/M/L/f/F/;/,/w/W/b/B/e/E: More vi-like cursor movement keys
-#   '/'/?:      Start forward/backward search
-#   n/N:        Repeat last search, N: in reverse direction
-#   Ctrl-f/b:   Scroll down/up one screen
-#   Ctrl-d/u:   Scroll down/up half a screen
-#   v/V/Ctrl-v: Toggle normal/linewise/blockwise selection
-#   y/Return:   Copy selection to primary buffer, Return: quit afterwards
-#   Y:          Copy selected lines to primary buffer or cursor line and quit
-#   q/Escape:   Quit keyboard selection mode
-
-
-use strict;
-
-sub on_start{
-	my ($self) = @_;
-
-	$self->{patterns}{'w'} = qr/\w[^\w\s]|\W\w|\s\S/;
-	$self->{patterns}{'W'} = qr/\s\S/;
-	$self->{patterns}{'b'} = qr/.*(?:\w[^\w\s]|\W\w|\s\S)/;
-	$self->{patterns}{'B'} = qr/.*\s\S/;
-	$self->{patterns}{'e'} = qr/[^\w\s](?=\w)|\w(?=\W)|\S(?=\s|$)/;
-	$self->{patterns}{'E'} = qr/\S(?=\s|$)/;
-
-	()
-}
-
-
-sub on_action {
-    my ($self, $action) = @_;
-
-    on_user_command($self, "keyboard-select:" . $action);
-}
-
-
-sub on_user_command {
-	my ($self, $cmd) = @_;
-
-	if (not $self->{active}) {
-		if ($cmd eq 'keyboard-select:activate') {
-			activate($self);
-		} elsif ($cmd eq 'keyboard-select:search') {
-			activate($self, 1);
-		}
-	}
-
-	()
-}
-
-
-sub key_press {
-	my ($self, $event, $keysym, $char) = @_;
-	my $key = chr($keysym);
-
-	if (lc($key) eq 'c' && $event->{state} & urxvt::ControlMask) {
-		deactivate($self);
-	} elsif ($self->{search}) {
-		if ($keysym == 0xff1b) {
-			if ($self->{search_mode}) {
-				deactivate($self);
-			} else {
-				$self->{search} = '';
-				status_area($self);
-			}
-		} elsif ($keysym == 0xff08) {
-			$self->{search} = substr($self->{search}, 0, -1);
-			if (not $self->{search} and $self->{search_mode}) {
-				deactivate($self);
-			} else {
-				status_area($self);
-			}
-		} elsif ($keysym == 0xff0d ||
-				(lc($key) eq 'm' && $event->{state} & urxvt::ControlMask)) {
-			my $txt = substr($self->{search}, 1);
-			if ($txt) {
-				$self->{pattern} = ($txt =~ m/[[:upper:]]/) ? qr/\Q$txt\E/ :
-						qr/\Q$txt\E/i;
-			} elsif ($self->{pattern}) {
-				delete $self->{pattern};
-			}
-			$self->{search} = '';
-			$self->screen_cur($self->{srhcr}, $self->{srhcc});
-			if (not find_next($self)) {
-				if ($self->{search_mode}) {
-					deactivate($self);
-				} else {
-					status_area($self);
-				}
-			}
-		} elsif (length($char) > 0) {
-			$self->{search} .= $self->locale_decode($char);
-			my $txt = substr($self->{search}, 1);
-			if ($txt) {
-				$self->{pattern} = ($txt =~ m/[[:upper:]]/) ? qr/\Q$txt\E/ :
-				qr/\Q$txt\E/i;
-			} elsif ($self->{pattern}) {
-				delete $self->{pattern};
-			}
-			$self->screen_cur($self->{srhcr}, $self->{srhcc});
-			find_next($self);
-			status_area($self);
-		}
-	} elsif ($self->{move_to}) {
-		if ($keysym == 0xff1b) {
-			$self->{move_to} = 0;
-			status_area($self);
-		} elsif (length($char) > 0) {
-			$self->{move_to} = 0;
-			$self->{patterns}{'f-1'} = qr/^.*\Q$key\E/;
-			$self->{patterns}{'f+1'} = qr/^.+?\Q$key\E/;
-			move_to($self, ';');
-			status_area($self);
-		}
-	} elsif ($keysym == 0xff1b || lc($key) eq 'q') {
-		deactivate($self);
-	} elsif (lc($key) eq 'y' || $keysym == 0xff0d ||
-			(lc($key) eq 'm' && $event->{state} & urxvt::ControlMask)) {
-		my $quit = 0;
-		if ($key eq 'Y' && $self->{select} ne 'l') {
-			$quit = !$self->{select};
-			toggle_select($self, 'l');
-		}
-		if ($self->{select}) {
-			my ($br, $bc, $er, $ec) = calc_span($self);
-			$ec = $self->line($er)->l if $self->{select} eq 'l';
-			$self->selection_beg($br, $bc);
-			$self->selection_end($er, $ec);
-			$self->selection_make($event->{time}, $self->{select} eq 'b');
-			if (lc($key) eq 'y') {
-				$self->selection_beg(1, 0);
-				$self->selection_end(1, 0);
-				$self->{select} = '';
-				status_area($self);
-				$self->want_refresh();
-			} else {
-				$quit = 1;
-			}
-		}
-		if ($quit) {
-			deactivate($self); 
-		}
-	} elsif ($key eq 'V') {
-		toggle_select($self, 'l');
-	} elsif ($key eq 'v') {
-		if ($event->{state} & urxvt::ControlMask) {
-			toggle_select($self, 'b');
-		} else {
-			toggle_select($self, 'n');
-		}
-	} elsif ($key eq 'k' || $keysym == 0xff52) {
-		move_cursor($self, 'k');
-	} elsif ($key eq 'j' || $keysym == 0xff54) {
-		move_cursor($self, 'j');
-	} elsif ($key eq 'h' || $keysym == 0xff51) {
-		move_cursor($self, 'h');
-	} elsif ($key eq 'l' || $keysym == 0xff53) {
-		move_cursor($self, 'l');
-	} elsif ($keysym == 0xff57) {
-		move_cursor($self, '$');
-	} elsif ($keysym == 0xff50) {
-		move_cursor($self, '^');
-	} elsif ('gG0^$HML' =~ m/\Q$key\E/ ||
-			('fbdu' =~ m/\Q$key\E/ && $event->{state} & urxvt::ControlMask)) {
-		move_cursor($self, $key);
-	} elsif (lc($key) eq 'f') {
-		$self->{move_to} = 1;
-		$self->{move_dir} = $key eq 'F' ? -1 : 1;
-		status_area($self, $key);
-	} elsif (';,wWbBeE' =~ m/\Q$key\E/) {
-		move_to($self, $key);
-	} elsif ($key eq '/' || $key eq '?') {
-		$self->{search} = $key;
-		$self->{search_dir} = $key eq '?' ? -1 : 1;
-		($self->{srhcr}, $self->{srhcc}) = $self->screen_cur();
-		status_area($self);
-	} elsif (lc($key) eq 'n') {
-		find_next($self, $self->{search_dir} * ($key eq 'N' ? -1 : 1));
-	}
-
-	return 1;
-}
-
-
-sub move_cursor {
-	my ($self, $key) = @_;
-	my ($cr, $cc) = $self->screen_cur();
-	my $line = $self->line($cr);
-
-	if ($key eq 'k' && $line->beg > $self->top_row) {
-		$cr = $line->beg - 1;
-	} elsif ($key eq 'j' && $line->end < $self->nrow - 1) {
-		$cr = $line->end + 1;
-	} elsif ($key eq 'h' && $self->{offset} > 0) {
-		$self->{offset} = $line->offset_of($cr, $cc) - 1;
-		$self->{dollar} = 0;
-	} elsif ($key eq 'l' && $self->{offset} < $line->l - 1) {
-		++$self->{offset};
-	} elsif ($key eq 'f' || $key eq 'd') {
-		my $vs = $self->view_start() +
-				($key eq 'd' ? $self->nrow / 2 : $self->nrow - 1);
-		$vs = 0 if $vs > 0;
-		$cr += $vs - $self->view_start($vs);
-	} elsif ($key eq 'b' || $key eq 'u') {
-		my $vs = $self->view_start() -
-				($key eq 'u' ? $self->nrow / 2 : $self->nrow - 1);
-		$vs = $self->top_row if $vs < $self->top_row;
-		$cr += $vs - $self->view_start($vs);
-	} elsif ($key eq 'g') {
-		($cr, $self->{offset}) = ($self->top_row, 0);
-		$self->{dollar} = 0;
-	} elsif ($key eq 'G') {
-		($cr, $self->{offset}) = ($self->nrow - 1, 0);
-		$self->{dollar} = 0;
-	} elsif ($key eq '0') {
-		$self->{offset} = 0;
-		$self->{dollar} = 0;
-	} elsif ($key eq '^') {
-		my $ltxt = $self->special_decode($line->t);
-		while ($ltxt =~ s/^( *)\t/$1 . " " x (8 - length($1) % 8)/e) {}
-		$self->{offset} = $ltxt =~ m/^ +/ ? $+[0] : 0;
-		$self->{dollar} = 0;
-	} elsif ($key eq '$') {
-		my $co = $line->offset_of($cr, $cc);
-		$self->{dollar} = $co + 1;
-		$self->{offset} = $line->l - 1;
-	} elsif ($key eq 'H') {
-		$cr = $self->view_start();
-	} elsif ($key eq 'M') {
-		$cr = $self->view_start() + $self->nrow / 2;
-	} elsif ($key eq 'L') {
-		$cr = $self->view_start() + $self->nrow - 1;
-	}
-
-	$line = $self->line($cr);
-	$cc = $self->{dollar} || $self->{offset} >= $line->l ? $line->l - 1 :
-			$self->{offset};
-	$self->screen_cur($line->coord_of($cc));
-
-	status_area($self);
-	$self->want_refresh();
-	
-	()
-}
-
-
-sub move_to {
-	my ($self, $key) = @_;
-	my ($cr, $cc) = $self->screen_cur();
-	my $line = $self->line($cr);
-	my $offset = $self->{offset};
-	my ($dir, $pattern);
-	my ($wrap, $found) = (0, 0);
-
-	if ($key eq ';' || $key eq ',') {
-		$dir = $self->{move_dir} * ($key eq ',' ? -1 : 1);
-		$pattern = $self->{patterns}{sprintf('f%+d', $dir)};
-		return if not $pattern;
-	} else {
-		if (lc($key) eq 'b') {
-			$dir = -1;
-		} else {
-			$dir = 1;
-			++$offset if lc($key) eq 'e';
-		}
-		$pattern = $self->{patterns}{$key};
-		$wrap = 1;
-	}
-
-	if ($dir > 0) {
-		NEXTDOWN: my $text = substr($line->t, $offset);
-		if ($text =~ m/$pattern/) {
-			$offset += $+[0] - 1;
-			$found = 1;
-		} elsif ($wrap && $line->end + 1 < $self->nrow) {
-			$cr = $line->end + 1;
-			$line = $self->line($cr);
-			$offset = 0;
-			if (lc($key) eq 'e') {
-				goto NEXTDOWN;
-			} else {
-				$found = 1;
-			}
-		}
-	} elsif ($dir < 0) {
-		NEXTUP: my $text = substr($line->t, 0, $offset);
-		if ($text =~ m/$pattern/) {
-			$offset += $+[0] - length($text) - 1;
-			$found = 1;
-		} elsif ($wrap) {
-			if ($offset > 0) {
-				$offset = 0;
-				$found = 1;
-			} elsif ($line->beg > $self->top_row) {
-				$cr = $line->beg - 1;
-				$line = $self->line($cr);
-				$offset = $line->l;
-				goto NEXTUP;
-			}
-		}
-	}
-
-	if ($found) {
-		$self->{dollar} = 0;
-		$self->{offset} = $offset;
-		$self->screen_cur($line->coord_of($offset));
-		$self->want_refresh();
-	}
-
-	()
-}
-
-
-sub find_next {
-	my ($self, $dir) = @_;
-
-	return if not $self->{pattern};
-	$dir = $self->{search_dir} if not $dir;
-
-	my ($cr, $cc) = $self->screen_cur();
-	my $line = $self->line($cr);
-	my $offset = $line->offset_of($cr, $cc);
-	my $text;
-	my $found = 0;
-
-	++$offset if $dir > 0;
-
-	while (not $found) {
-		if ($dir > 0) {
-			$text = substr($line->t, $offset);
-			if ($text =~ m/$self->{pattern}/) {
-				$found = 1;
-				$offset += $-[0];
-			} else {
-				last if $line->end >= $self->nrow;
-				$line = $self->line($line->end + 1);
-				$offset = 0;
-			}
-		} else {
-			$text = substr($line->t, 0, $offset);
-			if ($text =~ m/$self->{pattern}/) {
-				$found = 1;
-				$offset = $-[0] while $text =~ m/$self->{pattern}/g;
-			} else {
-				last if $line->beg <= $self->top_row;
-				$line = $self->line($line->beg - 1);
-				$offset = $line->l;
-			}
-		}
-	}
-
-	if ($found) {
-		$self->{dollar} = 0;
-		$self->{offset} = $offset;
-		$self->screen_cur($line->coord_of($offset));
-		status_area($self);
-		$self->want_refresh();
-	}
-
-	return $found;
-}
-
-
-sub tt_write {
-	return 1;
-}
-
-
-sub refresh {
-	my ($self) = @_;
-	my ($cr, $cc) = $self->screen_cur();
-
-	# scroll the current cursor position into visible area
-	if ($cr < $self->view_start()) {
-		$self->view_start($cr);
-	} elsif ($cr >= $self->view_start() + $self->nrow) {
-		$self->view_start($cr - $self->nrow + 1);
-	}
-
-	if ($self->{select}) {
-		my ($hl, $reverse_cursor);
-		my ($br, $bc, $er, $ec) = calc_span($self);
-
-		if ($self->x_resource('highlightColor')) {
-			$hl = urxvt::RS_Sel;
-			$reverse_cursor = 0;
-		} else {
-			$hl = urxvt::RS_RVid;
-			$reverse_cursor = $self->{select} ne 'l';
-		}
-		if ($self->{select} eq 'b') {
-			my $co = $self->line($cr)->offset_of($cr, $cc);
-			my $dollar = $self->{dollar} && $co >= $self->{dollar} - 1;
-
-			my $r = $br;
-			while ($r <= $er) {
-				my $line = $self->line($r);
-				if ($bc < $line->l) {
-					$ec = $line->l if $dollar;
-					my ($br, $bc) = $line->coord_of($bc);
-					my ($er, $ec) = $line->coord_of($ec <= $line->l ? $ec : $line->l);
-					$self->scr_xor_span($br, $bc, $er, $ec, $hl);
-				} elsif ($r == $cr) {
-					$reverse_cursor = 0;
-				}
-				$r = $line->end + 1;
-			}
-		} else {
-			$self->scr_xor_span($br, $bc, $er, $ec, $hl);
-		}
-
-		if ($reverse_cursor) {
-			# make the cursor visible again
-			$self->scr_xor_span($cr, $cc, $cr, $cc + 1, $hl);
-		}
-	}
-
-	()
-}
-
-
-sub activate {
-	my ($self, $search) = @_;
-
-	$self->{active} = 1;
-
-	$self->{select} = '';
-	$self->{dollar} = 0;
-	$self->{move_to} = 0;
-
-	if ($search) {
-		$self->{search} = '?';
-		$self->{search_dir} = -1;
-		$self->{search_mode} = 1;
-	} else {
-		$self->{search} = '';
-		$self->{search_mode} = 0;
-	}
-
-	($self->{oldcr}, $self->{oldcc}) = $self->screen_cur();
-	($self->{srhcr}, $self->{srhcc}) = $self->screen_cur();
-	$self->{old_view_start} = $self->view_start();
-	$self->{old_pty_ev_events} = $self->pty_ev_events(urxvt::EV_NONE);
-
-	my $line = $self->line($self->{oldcr});
-	$self->{offset} = $line->offset_of($self->{oldcr}, $self->{oldcc});
-
-	$self->selection_beg(1, 0);
-	$self->selection_end(1, 0);
-
-	$self->enable(
-		key_press     => \&key_press,
-		refresh_begin => \&refresh,
-		refresh_end   => \&refresh,
-		tt_write      => \&tt_write,
-	);
-
-	if ($self->{offset} >= $line->l) {
-		$self->{offset} = $line->l > 0 ? $line->l - 1 : 0;
-		$self->screen_cur($line->coord_of($self->{offset}));
-		$self->want_refresh();
-	}
-
-	$self->{overlay_len} = 0;
-	status_area($self);
-
-	()
-}
-
-
-sub deactivate {
-	my ($self) = @_;
-
-	$self->selection_beg(1, 0);
-	$self->selection_end(1, 0);
-
-	delete $self->{overlay} if $self->{overlay};
-
-	$self->disable("key_press", "refresh_begin", "refresh_end", "tt_write");
-	$self->screen_cur($self->{oldcr}, $self->{oldcc});
-	$self->view_start($self->{old_view_start});
-	$self->pty_ev_events($self->{old_pty_ev_events});
-
-	$self->want_refresh();
-
-	$self->{active} = 0;
-
-	()
-}
-
-
-sub status_area {
-	my ($self, $extra) = @_;
-	my ($stat, $stat_len);
-
-	if ($self->{search}) {
-		$stat_len = $self->ncol;
-		$stat = $self->{search} . ' ' x ($stat_len - length($self->{search}));
-	} else {
-		if ($self->{select}) {
-			$stat = "-V" . ($self->{select} ne 'n' ? uc($self->{select}) : "") . "- ";
-		}
-
-		if ($self->top_row == 0) {
-			$stat .= "All";
-		} elsif ($self->view_start() == $self->top_row) {
-			$stat .= "Top";
-		} elsif ($self->view_start() == 0) {
-			$stat .= "Bot";
-		} else {
-			$stat .= sprintf("%2d%%",
-					($self->top_row - $self->view_start) * 100 / $self->top_row);
-		}
-		
-		$stat = "$extra $stat" if $extra;
-		$stat_len = length($stat);
-	}
-
-	if (!$self->{overlay} || $self->{overlay_len} != $stat_len) {
-		delete $self->{overlay} if $self->{overlay};
-		$self->{overlay} = $self->overlay(-1, -1, $stat_len, 1,
-				urxvt::OVERLAY_RSTYLE, 0);
-		$self->{overlay_len} = $stat_len;
-	}
-
-	$self->{overlay}->set(0, 0, $self->special_encode($stat));
-	$self->{overlay}->show();
-
-	()
-}
-
-
-sub toggle_select {
-	my ($self, $mode) = @_;
-
-	if ($self->{select} eq $mode) {
-		$self->{select} = '';
-	} else {
-		if (not $self->{select}) {
-			($self->{ar}, $self->{ac}) = $self->screen_cur();
-		}
-		$self->{select} = $mode;
-	}
-
-	status_area($self);
-	$self->want_refresh();
-
-	()
-}
-
-
-sub calc_span {
-	my ($self) = @_;
-	my ($cr, $cc) = $self->screen_cur();
-	my ($br, $bc, $er, $ec);
-	
-	if ($self->{select} eq 'b') {
-		$br = $self->line($cr)->beg;
-		$bc = $self->line($cr)->offset_of($cr, $cc);
-		$er = $self->line($self->{ar})->beg;
-		$ec = $self->line($self->{ar})->offset_of($self->{ar}, $self->{ac});
-		($br, $er) = ($er, $br) if $br > $er;
-		($bc, $ec) = ($ec, $bc) if $bc > $ec;
-	} else {
-		if ($cr < $self->{ar}) {
-			($br, $bc, $er, $ec) = ($cr, $cc, $self->{ar}, $self->{ac});
-		} elsif ($cr > $self->{ar}) {
-			($br, $bc, $er, $ec) = ($self->{ar}, $self->{ac}, $cr, $cc);
-		} else {
-			($br, $er) = ($cr, $cr);
-			($bc, $ec) = $cc < $self->{ac} ? ($cc, $self->{ac}) : ($self->{ac}, $cc);
-		}
-	}
-
-	if ($self->{select} eq 'l') {
-		($br, $er) = ($self->line($br)->beg, $self->line($er)->end);
-		($bc, $ec) = (0, $self->ncol);
-	} else {
-		++$ec;
-	}
-
-	return ($br, $bc, $er, $ec);
-}
diff --git a/linux/i3/urxvt/ext/resize-font b/linux/i3/urxvt/ext/resize-font
deleted file mode 100644
index b6b8e4f..0000000
--- a/linux/i3/urxvt/ext/resize-font
+++ /dev/null
@@ -1,191 +0,0 @@
-# vim:ft=perl:fenc=utf-8:tw=80
-# Copyright (c) 2009-, Simon Lundström <simmel@soy.se>
-# Copyright (c) 2014 Maarten de Vries <maarten@de-vri.es>
-#
-# Permission to use, copy, modify, and/or distribute this software for any
-# purpose with or without fee is hereby granted, provided that the above
-# copyright notice and this permission notice appear in all copies.
-#
-# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-# ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-# OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-
-
-my @fonts = (
-  {'name' => 'font',           'code' => 710},
-  {'name' => 'boldFont',       'code' => 711},
-  {'name' => 'italicFont',     'code' => 712},
-  {'name' => 'boldItalicFont', 'code' => 713},
-);
-
-my @fixed = qw(4x6 5x7 5x8 6x9 6x10 6x12 6x13 7x13 7x14 8x13 8x16 9x15 9x18
-               10x20 12x24);
-my $step;
-
-sub on_start {
-  my ($self) = @_;
-
-  foreach (@fonts) {
-    $_->{'default'} = $self->resource($_->{'name'});
-  }
-
-  $step = $self->x_resource("%.step") || 2;
-}
-
-sub on_init {
-   my ($self) = @_;
-   my $commands = {
-     "smaller" => "C-minus",
-     "bigger"  => "C-plus",
-     "reset"   => "C-equal",
-     "show"    => "C-question",
-   };
-   bind_hotkeys($self, $commands);
-
-   ()
-}
-
-sub bind_hotkeys {
-  my ($self, $commands) = @_;
-
-  for (keys %$commands) {
-    my $hotkey = $$commands{$_};
-    my $hotkey_bound = $self->{'term'}->x_resource("keysym.$hotkey");
-    if (!defined($hotkey_bound) ) {
-      # Support old-style key bindings
-      if ($self->x_resource("%.$_")) {
-        $hotkey = $self->x_resource("%.$_");
-      }
-
-      # FIXME If we're bound to a keysym, don't bind the default.
-      $self->bind_action($hotkey, "%:$_") or
-      warn "unable to register '$hotkey' as hotkey for $_";
-    }
-    else {
-      if ($hotkey_bound !~ /^resize-font:/) {
-        warn "Hotkey $$commands{$_} already bound to $hotkey_bound, not ".
-             "binding to resize-font:$_ by default.";
-      }
-    }
-  }
-}
-
-sub on_action {
-  my ($self, $string) = @_;
-
-  if ($string eq "bigger") {
-    foreach (@fonts) {
-      next if not defined($_->{'default'});
-      update_font_size($self, $_, +$step);
-    }
-  }
-  elsif ($string eq "smaller") {
-    foreach (@fonts) {
-      next if not defined($_->{'default'});
-      update_font_size($self, $_, -$step);
-    }
-  }
-  elsif ($string eq "reset") {
-    foreach (@fonts) {
-      next if not defined($_->{'default'});
-      set_font($self, $_, $_->{'default'});
-    }
-  }
-  elsif ($string eq "show") {
-
-    my $term = $self->{'term'};
-    $term->{'resize-font'}{'overlay'} = {
-      ov => $term->overlay_simple(0, -1, format_font_info($self)),
-      to => urxvt::timer
-      ->new
-      ->start(urxvt::NOW + 1)
-      ->cb(sub {
-        delete $term->{'resize-font'}{'overlay'};
-      }),
-    };
-  }
-
-  ()
-}
-
-sub get_font {
-  my ($self, $name) = @_;
-  return $self->resource($name);
-}
-
-sub set_font {
-  my ($self, $font, $new) = @_;
-  $self->cmd_parse(sprintf("\33]%d;%s\007", $font->{'code'}, $new));
-}
-
-sub round {
-  return sprintf("%.0f", @_);
-}
-
-sub atleast {
-  my ($min, $val) = @_;
-  if (0 < abs $val && abs $val < $min){
-     return $val / abs($val)
-  }
-  return $val;
-}
-
-sub update_font_size {
-  my ($self, $font, $delta) = @_;
-  my $regex = qr"(?<=size=)(\d+(?:\.\d+)?)";
-  my $current = get_font($self, $font->{'name'});
-
-  my ($index) = grep { $fixed[$_] eq $current } 0..$#fixed;
-  if ($index or $index eq 0) {
-    my $inc = $delta / abs($delta);
-    $index += $inc;
-    if ($index < 0) { $index = 0; }
-    if ($index > $#fixed) { $index = $#fixed; }
-    $current = $fixed[$index];
-  }
-  elsif ($current =~ /^-/) {
-    my @font = split(/-/, $current);
-    # https://en.wikipedia.org/wiki/X_logical_font_description
-    #Pixel size
-    if ($font[7] gt 0) {
-      $delta = atleast(1, $delta);
-      my $newsize = round($font[7]+$delta);
-      $font[7] = $newsize if ($newsize > 0)
-    }
-    #Point size
-    elsif ($font[8] gt 0) {
-      $delta = atleast(1, $delta*10);
-      my $newsize = round($font[8]+$delta);
-      $font[8] = $newsize if ($newsize > 0)
-    }
-    $current = join('-', @font);
-  }
-  else {
-    my $newsize = $1+$delta if ($current =~ /$regex/);
-    $current =~ s/$regex/$newsize/ge if ($newsize > 0);
-  }
-  set_font($self, $font, $current);
-}
-
-sub format_font_info {
-  my ($self) = @_;
-
-  my $width = 0;
-  foreach (@fonts) {
-    my $length = length($_->{'name'});
-    $width = $length > $width ? $length : $width;
-  }
-  ++$width;
-
-  my $info = '';
-  foreach (@fonts) {
-    $info .= sprintf("%-${width}s %s\n", $_->{'name'} . ':',
-             get_font($self, $_->{'name'}));
-  }
-
-  return $info;
-}
diff --git a/linux/i3/urxvt/ext/url-select b/linux/i3/urxvt/ext/url-select
deleted file mode 100755
index 34637bb..0000000
--- a/linux/i3/urxvt/ext/url-select
+++ /dev/null
@@ -1,408 +0,0 @@
-#! perl -w
-# Author:   Bert Muennich
-# Website:  http://www.github.com/muennich/urxvt-perls
-# Based on: http://www.jukie.net/~bart/blog/urxvt-url-yank
-# License:  GPLv2
-
-# Use keyboard shortcuts to select URLs.
-# This should be used as a replacement for the default matcher extension,
-# it also makes URLs clickable with the middle mouse button.
-
-# Usage: put the following lines in your .Xdefaults/.Xresources:
-#   URxvt.perl-ext-common: ...,url-select
-#   URxvt.keysym.M-u: perl:url-select:select_next
-
-# Use Meta-u to activate URL selection mode, then use the following keys:
-#   j/k:      Select next downward/upward URL (also with arrow keys)
-#   g/G:      Select first/last URL (also with home/end key)
-#   o/Return: Open selected URL in browser, Return: deactivate afterwards
-#   y:        Copy (yank) selected URL and deactivate selection mode
-#   q/Escape: Deactivate URL selection mode
-
-# Options:
-#   URxvt.url-select.autocopy:  If true, selected URLs are copied to PRIMARY
-#   URvxt.url-select.button:    Mouse button to click-open URLs (default: 2)
-#   URxvt.url-select.launcher:  Browser/command to open selected URL with
-#   URxvt.url-select.underline: If set to true, all URLs get underlined
-
-use strict;
-
-# The custom rendition bit to use for marking the cell as being underlined
-# by us so we can unset it again after a line has changed.
-use constant UNDERLINED => 1<<3; # arbitrarily chosen in hope of no collision
-
-sub on_start {
-	my ($self) = @_;
-
-	# read resource settings
-	if ($self->x_resource('url-select.launcher')) {
-		@{$self->{browser}} = split /\s+/, $self->x_resource('url-select.launcher');
-	} else {
-		@{$self->{browser}} = ('x-www-browser');
-	}
-	if ($self->x_resource('url-select.underline') eq 'true') {
-		$self->enable(line_update => \&line_update);
-	}
-	if ($self->x_resource('url-select.autocopy') eq 'true') {
-		$self->{autocopy} = 1;
-	}
-
-	$self->{state} = 0;
-
-	for my $mod (split '', $self->x_resource("url-select.button") ||
-	                       $self->x_resource("matcher.button") || 2) {
-		if ($mod =~ /^\d+$/) {
-			$self->{button} = $mod;
-		} elsif ($mod eq "C") {
-			$self->{state} |= urxvt::ControlMask;
-		} elsif ($mod eq "S") {
-			$self->{state} |= urxvt::ShiftMask;
-		} elsif ($mod eq "M") {
-			$self->{state} |= $self->ModMetaMask;
-		} elsif ($mod ne "-" && $mod ne " ") {
-			warn("invalid button/modifier in $self->{_name}<$self->{argv}[0]>: $mod\n");
-		}
-	}
-
-	if ($self->x_resource('matcher.pattern')) {
-		@{$self->{pattern}} = ($self->x_resource('matcher.pattern'));
-	} elsif ($self->x_resource('matcher.pattern.0')) {
-		my $current = 0;
-
-		while (defined (my $res = $self->x_resource("matcher.pattern.$current"))) {
-			$res = $self->locale_decode($res);
-			utf8::encode $res;
-			push @{$self->{pattern}}, qr($res)x;
-			$current++;
-		}
-	} else {
-		@{$self->{pattern}} = qr{
-			(?:https?://|ftp://|news://|mailto:|file://|\bwww\.)
-			[\w\-\@;\/?:&=%\$.+!*\x27,~#]*
-			(
-				\([\w\-\@;\/?:&=%\$.+!*\x27,~#]*\)   # Allow a pair of matched parentheses
-				|                                    #
-				[\w\-\@;\/?:&=%\$+*~]                # exclude some trailing characters (heuristic)
-			)+
-		}x;
-	}
-
-	()
-}
-
-
-sub line_update {
-	my ($self, $row) = @_;
-
-	my $line = $self->line($row);
-	my $text = $line->t;
-	my $rend = $line->r;
-
-	# clear all underlines that were set by us
-	for (@$rend) {
-		if (urxvt::GET_CUSTOM($_) & UNDERLINED) {
-			$_ = urxvt::SET_CUSTOM($_, urxvt::GET_CUSTOM($_) & ~UNDERLINED) &
-			     ~urxvt::RS_Uline;
-		}
-	}
-
-	for my $pattern (@{$self->{pattern}}) {
-		while ($text =~ /$pattern/g) {
-			my $url = $&;
-			my ($beg, $end) = ($-[0], $+[0] - 1);
-
-			for (@{$rend}[$beg .. $end]) {
-				unless ($_ & urxvt::RS_Uline) {
-					$_ = urxvt::SET_CUSTOM($_, urxvt::GET_CUSTOM($_) | UNDERLINED);
-					$_ |= urxvt::RS_Uline;
-				}
-			}
-		}
-	}
-
-	$line->r($rend);
-
-	()
-}
-
-sub on_action {
-    my ($self, $action) = @_;
-
-    on_user_command($self, "url-select:" . $action);
-}
-
-
-sub on_user_command {
-	my ($self, $cmd) = @_;
-
-	if ($cmd eq 'url-select:select_next') {
-		if (not $self->{active}) {
-			activate($self);
-		}
-		select_next($self, -1);
-	}
-
-	()
-}
-
-
-sub key_press {
-	my ($self, $event, $keysym) = @_;
-	my $char = chr($keysym);
-
-	if ($keysym == 0xff1b || lc($char) eq 'q' ||
-	    (lc($char) eq 'c' && $event->{state} & urxvt::ControlMask)) {
-		deactivate($self);
-	} elsif ($keysym == 0xff0d || $char eq 'o' ||
-			(lc($char) eq 'm' && $event->{state} & urxvt::ControlMask)) {
-		$self->exec_async(@{$self->{browser}}, ${$self->{found}[$self->{n}]}[4]);
-		deactivate($self) unless $char eq 'o';
-	} elsif ($char eq 'y') {
-		my $found = $self->{found}[$self->{n}];
-		$self->selection_beg(${$found}[0], ${$found}[1]);
-		$self->selection_end(${$found}[2], ${$found}[3]);
-		$self->selection_make($event->{time});
-		$self->selection_beg(1, 0);
-		$self->selection_end(1, 0);
-		deactivate($self);
-	} elsif ($char eq 'k' || $keysym == 0xff52 || $keysym == 0xff51) {
-		select_next($self, -1, $event);
-	} elsif ($char eq 'j' || $keysym == 0xff54 || $keysym == 0xff53) {
-		select_next($self, 1, $event);
-	} elsif ($char eq 'g' || $keysym == 0xff50) {
-		$self->{row} = $self->top_row - 1;
-		delete $self->{found};
-		select_next($self, 1, $event);
-	} elsif ($char eq 'G' || $keysym == 0xff57) {
-		$self->{row} = $self->nrow;
-		delete $self->{found};
-		select_next($self, -1, $event);
-	}
-
-	return 1;
-}
-
-
-sub on_button_press {
-	my ($self, $event) = @_;
-
-	my $mask = $self->ModLevel3Mask | $self->ModMetaMask |
-	           urxvt::ShiftMask | urxvt::ControlMask;
-
-	if ($event->{button} == $self->{button} && ($event->{state} & $mask) == $self->{state}) {
-		my $col = $event->{col};
-		my $row = $event->{row};
-		my $line = $self->line($row);
-		my $text = $line->t;
-
-		for my $pattern (@{$self->{pattern}}) {
-			while ($text =~ /$pattern/g) {
-				my ($url, $beg, $end) = ($&, $-[0], $+[0]);
-				--$end if $url =~ s/["')]$//;
-
-				if ($col >= $beg && $col <= $end) {
-					$self->{button_pressed} = 1;
-					$self->{button_col} = $col;
-					$self->{button_row} = $row;
-					$self->{button_url} = $url;
-					return 1;
-				}
-			}
-		}
-	}
-
-	()
-}
-
-sub on_button_release {
-	my ($self, $event) = @_;
-
-	if ($self->{button_pressed} && $event->{button} == $self->{button}) {
-		my $col = $event->{col};
-		my $row = $event->{row};
-
-		$self->{button_pressed} = 0;
-
-		if ($col == $self->{button_col} && $row == $self->{button_row}) {
-			$self->exec_async(@{$self->{browser}}, $self->{button_url});
-			return 1;
-		}
-	}
-
-	()
-}
-
-
-sub select_next {
-	# $dir < 0: up, > 0: down
-	my ($self, $dir, $event) = @_;
-	my $row = $self->{row};
-
-	if (($dir < 0 && $self->{n} > 0) ||
-			($dir > 0 && $self->{n} < $#{ $self->{found} })) {
-		# another url on current line
-		$self->{n} += $dir;
-		hilight($self);
-		if ($self->{autocopy}) {
-			my $found = $self->{found}[$self->{n}];
-			$self->selection_beg(${$found}[0], ${$found}[1]);
-			$self->selection_end(${$found}[2], ${$found}[3]);
-			$self->selection_make($event->{time});
-			$self->selection_beg(1, 0);
-			$self->selection_end(1, 0);
-		}
-		return;
-	}
-
-	while (($dir < 0 && $row > $self->top_row) ||
-	       ($dir > 0 && $row < $self->nrow - 1)) {
-		my $line = $self->line($row);
-		$row = ($dir < 0 ? $line->beg : $line->end) + $dir;
-		$line = $self->line($row);
-		my $text = $line->t;
-
-		for my $pattern (@{$self->{pattern}}) {
-			if ($text =~ /$pattern/g) {
-				delete $self->{found};
-
-				do {
-					my ($beg, $end) = ($-[0], $+[0]);
-					push @{$self->{found}}, [$line->coord_of($beg),
-							$line->coord_of($end), substr($text, $beg, $end - $beg)];
-				} while ($text =~ /$pattern/g);
-
-				$self->{row} = $row;
-				$self->{n} = $dir < 0 ? $#{$self->{found}} : 0;
-				hilight($self);
-				if ($self->{autocopy}) {
-					my $found = $self->{found}[$self->{n}];
-					$self->selection_beg(${$found}[0], ${$found}[1]);
-					$self->selection_end(${$found}[2], ${$found}[3]);
-					$self->selection_make($event->{time});
-					$self->selection_beg(1, 0);
-					$self->selection_end(1, 0);
-				}
-				return;
-			}
-		}
-	}
-
-	deactivate($self) unless $self->{found};
-
-	()
-}
-
-
-sub hilight {
-	my ($self) = @_;
-
-	if ($self->{found}) {
-		if ($self->{row} < $self->view_start() ||
-				$self->{row} >= $self->view_start() + $self->nrow) {
-			# scroll selected url into visible area
-			my $top = $self->{row} - ($self->nrow >> 1);
-			$self->view_start($top < 0 ? $top : 0);
-		}
-
-		status_area($self);
-		$self->want_refresh();
-	}
-
-	()
-}
-
-
-sub refresh {
-	my ($self) = @_;
-
-	if ($self->{found}) {
-		if ($self->x_resource('highlightColor')) {
-			$self->scr_xor_span(@{$self->{found}[$self->{n}]}[0 .. 3], urxvt::RS_Sel);
-		} else {
-			$self->scr_xor_span(@{$self->{found}[$self->{n}]}[0 .. 3], urxvt::RS_RVid);
-		}
-	}
-
-	()
-}
-
-
-sub status_area {
-	my ($self) = @_;
-
-	my $row = $self->{row} < 0 ?
-			$self->{row} - $self->top_row : abs($self->top_row) + $self->{row};
-	my $text = sprintf("%d,%d ", $row + 1, $self->{n} + 1);
-
-	if ($self->top_row == 0) {
-		$text .= "All";
-	} elsif ($self->view_start() == $self->top_row) {
-		$text .= "Top";
-	} elsif ($self->view_start() == 0) {
-		$text .= "Bot";
-	} else {
-		$text .= sprintf("%2d%",
-				($self->top_row - $self->view_start) * 100 / $self->top_row);
-	}
-
-	my $text_len = length($text);
-
-	if ($self->{overlay_len} != $text_len) {
-		delete $self->{overlay} if $self->{overlay};
-		$self->{overlay} = $self->overlay(-1, -1, $text_len, 1,
-				urxvt::OVERLAY_RSTYLE, 0);
-		$self->{overlay_len} = $text_len;
-	}
-
-	$self->{overlay}->set(0, 0, $self->special_encode($text));
-	$self->{overlay}->show();
-
-	()
-}
-
-
-sub tt_write {
-	return 1;
-}
-
-
-sub activate {
-	my ($self) = @_;
-
-	$self->{active} = 1;
-
-	$self->{row} = $self->view_start() + $self->nrow;
-	$self->{n} = 0;
-	$self->{overlay_len} = 0;
-	$self->{button_pressed} = 0;
-
-	$self->{view_start} = $self->view_start();
-	$self->{pty_ev_events} = $self->pty_ev_events(urxvt::EV_NONE);
-
-	$self->enable(
-		key_press     => \&key_press,
-		refresh_begin => \&refresh,
-		refresh_end   => \&refresh,
-		tt_write      => \&tt_write,
-	);
-
-	()
-}
-
-
-sub deactivate {
-	my ($self) = @_;
-
-	$self->disable("key_press", "refresh_begin", "refresh_end", "tt_write");
-	$self->view_start($self->{view_start});
-	$self->pty_ev_events($self->{pty_ev_events});
-
-	delete $self->{overlay} if $self->{overlay};
-	delete $self->{found} if $self->{found};
-
-	$self->want_refresh();
-
-	$self->{active} = 0;
-
-	()
-}
diff --git a/linux/i3/urxvt/urxvt b/linux/i3/urxvt/urxvt
deleted file mode 120000
index e98a3bb..0000000
--- a/linux/i3/urxvt/urxvt
+++ /dev/null
@@ -1 +0,0 @@
-/home/jakob/_code/dotfiles/Common/i3/urxvt
\ No newline at end of file
diff --git a/linux/i3/xsettingsd b/linux/i3/xsettingsd
deleted file mode 100755
index 8499496..0000000
--- a/linux/i3/xsettingsd
+++ /dev/null
@@ -1,4 +0,0 @@
-Xft/Hinting 1
-Xft/RGBA "rgb"
-Xft/HintStyle "hintslight"
-Xft/Antialias 1
diff --git a/linux/polybar/config.ini b/linux/polybar/config.ini
deleted file mode 100644
index 4dff50c..0000000
--- a/linux/polybar/config.ini
+++ /dev/null
@@ -1,275 +0,0 @@
-;==========================================================
-;
-;
-;   ██████╗  ██████╗ ██╗  ██╗   ██╗██████╗  █████╗ ██████╗
-;   ██╔══██╗██╔═══██╗██║  ╚██╗ ██╔╝██╔══██╗██╔══██╗██╔══██╗
-;   ██████╔╝██║   ██║██║   ╚████╔╝ ██████╔╝███████║██████╔╝
-;   ██╔═══╝ ██║   ██║██║    ╚██╔╝  ██╔══██╗██╔══██║██╔══██╗
-;   ██║     ╚██████╔╝███████╗██║   ██████╔╝██║  ██║██║  ██║
-;   ╚═╝      ╚═════╝ ╚══════╝╚═╝   ╚═════╝ ╚═╝  ╚═╝╚═╝  ╚═╝
-;
-;
-;   To learn more about how to configure Polybar
-;   go to https://github.com/polybar/polybar
-;
-;   The README contains a lot of information
-;
-;==========================================================
-
-[colors]
-background = #282A2E
-background-alt = #373B41
-foreground = #C5C8C6
-primary = #F0C674
-secondary = #8ABEB7
-alert = #A54242
-disabled = #707880
-
-[bar/example]
-width = 100%
-height = 24pt
-radius = 6
-
-; dpi = 96
-
-background = ${colors.background}
-foreground = ${colors.foreground}
-
-line-size = 3pt
-
-border-size = 4pt
-border-color = #00000000
-
-padding-left = 0
-padding-right = 1
-
-module-margin = 1
-
-separator = |
-separator-foreground = ${colors.disabled}
-
-font-0 = monospace;2
-
-modules-left = xworkspaces 
-modules-right = pulseaudio xkeyboard memory cpu wlan eth battery date
-
-cursor-click = pointer
-cursor-scroll = ns-resize
-
-enable-ipc = true
-
-; tray-position = right
-
-; wm-restack = generic
-; wm-restack = bspwm
-; wm-restack = i3
-
-; override-redirect = true
-
-[module/bspwm]
-type = internal/bspwm
-
-; Only show workspaces defined on the same output as the bar
-; NOTE: The bspwm and XRandR monitor names must match, which they do by default.
-; But if you rename your bspwm monitors with bspc -n this option will no longer
-; behave correctly.
-; Default: true
-pin-workspaces = true
-
-; Output mode flags after focused state label
-; Default: false
-inline-mode = false
-
-; Create click handler used to focus workspace
-; Default: true
-enable-click = false
-
-; Create scroll handlers used to cycle workspaces
-; Default: true
-enable-scroll = false
-
-; Set the scroll cycle direction 
-; Default: true
-reverse-scroll = false
-
-; Use fuzzy (partial) matching on labels when assigning 
-; icons to workspaces
-; Example: code;♚ will apply the icon to all workspaces 
-; containing 'code' in the label
-; Default: false
-fuzzy-match = true
-
-; Only scroll through occupied workspaces
-; Default: false
-; New in version 3.6.0
-occupied-scroll = true
-
-[module/xworkspaces]
-type = internal/xworkspaces
-
-label-active = %name%
-label-active-background = ${colors.background-alt}
-label-active-underline= ${colors.primary}
-label-active-padding = 1
-
-label-occupied = %name%
-label-occupied-padding = 1
-
-label-urgent = %name%
-label-urgent-background = ${colors.alert}
-label-urgent-padding = 1
-
-label-empty = %name%
-label-empty-foreground = ${colors.disabled}
-label-empty-padding = 1
-
-[module/xwindow]
-type = internal/xwindow
-label = %title:0:60:...%
-
-[module/filesystem]
-type = internal/fs
-interval = 25
-
-mount-0 = /
-
-label-mounted = %{F#F0C674}%mountpoint%%{F-} %percentage_used%%
-
-label-unmounted = %mountpoint% not mounted
-label-unmounted-foreground = ${colors.disabled}
-
-[module/pulseaudio]
-type = internal/pulseaudio
-
-format-volume-prefix = "VOL "
-format-volume-prefix-foreground = ${colors.primary}
-format-volume = <label-volume>
-
-label-volume = %percentage%%
-
-label-muted = muted
-label-muted-foreground = ${colors.disabled}
-
-[module/xkeyboard]
-type = internal/xkeyboard
-blacklist-0 = num lock
-
-label-layout = %layout%
-label-layout-foreground = ${colors.primary}
-
-label-indicator-padding = 2
-label-indicator-margin = 1
-label-indicator-foreground = ${colors.background}
-label-indicator-background = ${colors.secondary}
-
-[module/memory]
-type = internal/memory
-interval = 2
-format-prefix = "RAM "
-format-prefix-foreground = ${colors.primary}
-label = %percentage_used:2%%
-
-[module/cpu]
-type = internal/cpu
-interval = 2
-format-prefix = "CPU "
-format-prefix-foreground = ${colors.primary}
-label = %percentage:2%%
-
-[network-base]
-type = internal/network
-interval = 5
-format-connected = <label-connected>
-format-disconnected = <label-disconnected>
-label-disconnected = %{F#F0C674}%ifname%%{F#707880} disconnected
-
-[module/wlan]
-inherit = network-base
-interface-type = wireless
-label-connected = %{F#F0C674}%ifname%%{F-} %essid% %local_ip%
-
-[module/eth]
-inherit = network-base
-interface-type = wired
-label-connected = %{F#F0C674}%ifname%%{F-} %local_ip%
-
-[module/date]
-type = internal/date
-interval = 1
-
-date = %H:%M
-date-alt = %Y-%m-%d %H:%M:%S
-
-label = %date%
-label-foreground = ${colors.primary}
-
-[module/battery]
-type = internal/battery
-
-; This is useful in case the battery never reports 100% charge
-; Default: 100
-full-at = 99
-
-; format-low once this charge percentage is reached
-; Default: 10
-; New in version 3.6.0
-low-at = 10
-
-; Use the following command to list batteries and adapters:
-; $ ls -1 /sys/class/power_supply/
-battery = BAT0
-adapter = ADP1
-
-; If an inotify event haven't been reported in this many
-; seconds, manually poll for new values.
-;
-; Needed as a fallback for systems that don't report events
-; on sysfs/procfs.
-;
-; Disable polling by setting the interval to 0.
-;
-; Default: 5
-poll-interval = 5
-
-label-charging = Charging %percentage%%
-
-[module/temperature]
-type = internal/temperature
-
-; Seconds to sleep between updates
-; Default: 1
-interval = 0.5
-
-; Thermal zone to use
-; To list all the zone types, run 
-; $ for i in /sys/class/thermal/thermal_zone*; do echo "$i: $(<$i/type)"; done
-; Default: 0
-thermal-zone = 0
-
-; Select thermal zone by name
-; The name has to match the contents of /sys/class/thermal/thermal_zone*/type
-; for the desired thermal zone.
-; New in version 3.7.0
-; Default: ""
-zone-type = x86_pkg_temp
-
-; Full path of temperature sysfs path
-; Use `sensors` to find preferred temperature source, then run
-; $ for i in /sys/class/hwmon/hwmon*/temp*_input; do echo "$(<$(dirname $i)/name): $(cat ${i%_*}_label 2>/dev/null || echo $(basename ${i%_*})) $(readlink -f $i)"; done
-; to find path to desired file
-; Default reverts to thermal zone setting
-hwmon-path = /sys/devices/platform/coretemp.0/hwmon/hwmon2/temp1_input
-
-; Base temperature for where to start the ramp (in degrees celsius)
-; Default: 0
-base-temperature = 20
-
-; Threshold temperature to display warning label (in degrees celsius)
-; Default: 80
-warn-temperature = 60
-
-[settings]
-screenchange-reload = true
-pseudo-transparency = false
-
-; vim:ft=dosini
diff --git a/linux/qtile/config/__pycache__/config_screens.cpython-312.pyc b/linux/qtile/config/__pycache__/config_screens.cpython-312.pyc
deleted file mode 100644
index e588404..0000000
--- a/linux/qtile/config/__pycache__/config_screens.cpython-312.pyc
+++ /dev/null
diff --git a/linux/qtile/config/autostart.sh b/linux/qtile/config/autostart.sh
deleted file mode 100755
index cf95bd1..0000000
--- a/linux/qtile/config/autostart.sh
+++ /dev/null
@@ -1,10 +0,0 @@
-#!/bin/sh
-nm-applet &
-echo "Starting blueman-applet"
-blueman-applet &
-echo "Starting udiskie"
-udiskie &
-echo "Starting fcitx5"
-fcitx5 -d &
-echo "Starting nextcloud"
-nextcloud --background &
diff --git a/linux/qtile/config/config.py.m4 b/linux/qtile/config/config.py.m4
deleted file mode 100644
index d32becd..0000000
--- a/linux/qtile/config/config.py.m4
+++ /dev/null
@@ -1,117 +0,0 @@
-# Copyright (c) 2010 Aldo Cortesi
-# Copyright (c) 2010, 2014 dequis
-# Copyright (c) 2012 Randall Ma
-# Copyright (c) 2012-2014 Tycho Andersen
-# Copyright (c) 2012 Craig Barnes
-# Copyright (c) 2013 horsik
-# Copyright (c) 2013 Tao Sauvage
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to deal
-# in the Software without restriction, including without limitation the rights
-# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-# copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-# SOFTWARE.
-
-import subprocess, os
-from libqtile import bar, layout, qtile, hook, extension, widget
-from libqtile.config import Click, Drag, Group, Key, Match, Screen
-from libqtile.lazy import lazy
-from libqtile.utils import guess_terminal, send_notification
-
-from qtile_extras.widget import UPowerWidget
-from qtile_extras.resources import wallpapers
-from libqtile.log_utils import logger
-
-os.environ["PATH"] += os.pathsep + os.path.expanduser('/var/lib/flatpak/exports/share')
-os.environ["PATH"] += os.pathsep + os.path.expanduser('/var/lib/flatpak/exports/share/applications')
-
-mod = "mod4"
-mod1 = "mod1"
-terminal = guess_terminal()
-
-m4_include(`linux/qtile/config/keys.m4.py')m4_dnl
-
-# Add key bindings to switch VTs in Wayland.
-# We can't check qtile.core.name in default config as it is loaded before qtile is started
-# We therefore defer the check until the key binding is run by using .when(func=...)
-for vt in range(1, 8):
-    keys.append(
-        Key(
-            ["control", "mod1"],
-            f"f{vt}",
-            lazy.core.change_vt(vt).when(func=lambda: qtile.core.name == "wayland"),
-            desc=f"Switch to VT{vt}",
-        )
-    )
-
-# Drag floating layouts.
-mouse = [
-    Drag([mod], "Button1", lazy.window.set_position_floating(), start=lazy.window.get_position()),
-    Drag([mod], "Button3", lazy.window.set_size_floating(), start=lazy.window.get_size()),
-    Click([mod], "Button2", lazy.window.bring_to_front()),
-]
-
-dgroups_key_binder = None
-dgroups_app_rules = []  # type: list
-follow_mouse_focus = True
-bring_front_click = False
-floats_kept_above = True
-cursor_warp = False
-auto_fullscreen = True
-focus_on_window_activation = "smart"
-reconfigure_screens = True
-
-m4_include(`linux/qtile/config/screen.m4.py')m4_dnl
-m4_include(`linux/qtile/config/group.m4.py')m4_dnl
-m4_include(`linux/qtile/config/layout.m4.py')m4_dnl
-
-# Drag floating layouts.
-mouse = [
-    Drag([mod], "Button1", lazy.window.set_position_floating(), start=lazy.window.get_position()),
-    Drag([mod], "Button3", lazy.window.set_size_floating(), start=lazy.window.get_size()),
-    Click([mod], "Button2", lazy.window.bring_to_front()),
-]
-
-dgroups_key_binder = None
-dgroups_app_rules = []  # type: list
-follow_mouse_focus = True
-bring_front_click = True
-floats_kept_above = True
-cursor_warp = True
-auto_fullscreen = True
-focus_on_window_activation = "smart"
-reconfigure_screens = True
-
-# If things like steam games want to auto-minimize themselves when losing
-# focus, should we respect this or not?
-auto_minimize = True
-
-# When using the Wayland backend, this can be used to configure input devices.
-wl_input_rules = None
-
-# XXX: Gasp! We're lying here. In fact, nobody really uses or cares about this
-# string besides java UI toolkits; you can see several discussions on the
-# mailing lists, GitHub issues, and other WM documentation that suggest setting
-# this string if your java app doesn't work correctly. We may as well just lie
-# and say that we're a working one by default.
-#
-# We choose LG3D to maximize irony: it is a 3D non-reparenting WM written in
-# java that happens to be on java's whitelist.
-wmname = "LG3D"
-
-@hook.subscribe.startup_once
-def autostart():
-    home = os.path.expanduser('~/.config/qtile/autostart.sh')
-    subprocess.Popen([home])
diff --git a/linux/qtile/config/group.m4.py b/linux/qtile/config/group.m4.py
deleted file mode 100644
index 7132abc..0000000
--- a/linux/qtile/config/group.m4.py
+++ /dev/null
@@ -1,67 +0,0 @@
-groups = [
-    Group(name="1"),
-    Group(name="2"),
-    Group(name="3"),
-    Group(name="4"),
-    Group(name="5"),
-    Group(name="6"),
-    Group(name="7"),
-    Group(name="8"),
-    Group(name="9"),
-]
-
-group_screen_map = dict()
-
-def to_group(name: str):
-    def _inner(qtile):
-        g = qtile.groups_map[name]
-        if (sc := group_screen_map[name]) is not None:
-            if sc < num_monitors:
-                qtile.to_screen(sc)
-        g.toscreen()
-    return _inner
-
-
-for g in groups:
-    group_screen_map[g.name] = None
-    keys.extend(
-        [
-            Key(
-                [mod],
-                g.name,
-                lazy.function(to_group(g.name)),
-                desc="Switch to group {}".format(g.name),
-            ),
-            Key(
-                [mod, "shift"],
-                g.name,
-                lazy.window.togroup(g.name),
-                desc="move focused window to group {}".format(g.name)
-            ),
-        ]
-    )
-
-@hook.subscribe.group_window_add
-def group_window_add(group, window):
-    groups = qtile.get_groups()
-    global group_screen_map
-    group_screen_map[group.name] = groups[group.name]["screen"]
-    logger.warning(group_screen_map)
-
-
-#@hook.subscribe.delgroup
-#def group_deleted(group_name):
-#    send_notification("qtile", f"Group deleted: {group_name}")
-#
-#@hook.subscribe.setgroup
-#def setgroup():
-#    send_notification("qtile", "Group set")
-#
-#
-#@hook.subscribe.changegroup
-#def change_group():
-#    send_notification("qtile", "Change group event")
-#
-#@hook.subscribe.addgroup
-#def group_added(group_name):
-#    send_notification("qtile", f"New group added: {group_name}")
diff --git a/linux/qtile/config/keys.m4.py b/linux/qtile/config/keys.m4.py
deleted file mode 100644
index 77e4f9b..0000000
--- a/linux/qtile/config/keys.m4.py
+++ /dev/null
@@ -1,68 +0,0 @@
-keys = [
-    # A list of available commands that can be bound to keys can be found
-    # at https://docs.qtile.org/en/latest/manual/config/lazy.html
-    # Switch between windows
-    Key([mod], "h", lazy.layout.left(), desc="Move focus to left"),
-    Key([mod], "l", lazy.layout.right(), desc="Move focus to right"),
-    Key([mod], "j", lazy.layout.down(), desc="Move focus down"),
-    Key([mod], "k", lazy.layout.up(), desc="Move focus up"),
-    # Move windows between left/right columns or move up/down in current stack.
-    # Moving out of range in Columns layout will create new column.
-    Key([mod, "shift"], "h", lazy.layout.shuffle_left(), desc="Move window to the left"),
-    Key([mod, "shift"], "l", lazy.layout.shuffle_right(), desc="Move window to the right"),
-    Key([mod, "shift"], "j", lazy.layout.shuffle_down(), desc="Move window down"),
-    Key([mod, "shift"], "k", lazy.layout.shuffle_up(), desc="Move window up"),
-    # Grow windows. If current window is on the edge of screen and direction
-    # will be to screen edge - window would shrink.
-    Key([mod, "control"], "h", lazy.layout.grow_left(), desc="Grow window to the left"),
-    Key([mod, "control"], "l", lazy.layout.grow_right(), desc="Grow window to the right"),
-    Key([mod, "control"], "j", lazy.layout.grow_down(), desc="Grow window down"),
-    Key([mod, "control"], "k", lazy.layout.grow_up(), desc="Grow window up"),
-    Key([mod], "n", lazy.layout.normalize(), desc="Reset all window sizes"),
-    # Toggle between split and unsplit sides of stack.
-    # Split = all windows displayed
-    # Unsplit = 1 window displayed, like Max layout, but still with
-    # multiple stack panes
-    # Key(
-    #     [mod, "shift"],
-    #     "Return",
-    #     lazy.layout.toggle_split(),
-    #     desc="Toggle between split and unsplit sides of stack",
-    # ),
-    Key([mod], "Return", lazy.spawn(terminal), desc="Launch terminal"),
-    # Toggle between different layouts as defined below
-    Key([mod], "Tab", lazy.next_layout(), desc="Toggle between layouts"),
-    Key([mod1], "f4", lazy.window.kill(), desc="Kill focused window"),
-    Key(
-        [mod],
-        "f",
-        lazy.window.toggle_fullscreen(),
-        desc="Toggle fullscreen on the focused window",
-    ),
-    Key([mod], "space", lazy.window.toggle_floating(), desc="Toggle floating on the focused window"),
-    Key([mod, "control"], "c", lazy.reload_config(), desc="Reload the config"),
-    Key([mod, "control", "shift"], "c", lazy.restart(), desc="Restart QTile"),
-    Key([mod, "control"], "q", lazy.shutdown(), desc="Shutdown Qtile"),
-    Key([mod], "r", lazy.spawncmd(), desc="Spawn a command using a prompt widget"),
-    Key([mod1], "l", lazy.spawn("xsecurelock"), desc="Toggle floating on the focused window"),
-    #Key([mod], 'd', lazy.run_extension(extension.DmenuRun(
-    #    dmenu_ignorecase=True,
-    #    dmenu_font="Andika-8",
-    #    dmenu_lines=10,
-    #    dmenu_bottom=True,
-    #))),
-    Key([mod], 'd', lazy.spawn("rofi -show drun")),
-
-    # audio
-    Key([], 'XF86AudioRaiseVolume', lazy.spawn('amixer sset Master 5%+')),
-    Key([], 'XF86AudioLowerVolume', lazy.spawn('amixer sset Master 5%-')),
-    Key([], 'XF86AudioMute', lazy.spawn('amixer sset Master toggle')),
-    Key([], 'XF86AudioMicMute', lazy.spawn('amixer set Capture toggle')),
-    
-    # backlight
-    Key([], 'XF86MonBrightnessDown', lazy.spawn('brightnessctl set 5%-')),
-    Key([], 'XF86MonBrightnessUp', lazy.spawn('brightnessctl set +5%')),
-
-    # tt gui
-    Key([mod, "shift"], "Return", lazy.spawn("/home/jakob/.local/bin/tt-g")),
-]
diff --git a/linux/qtile/config/layout.m4.py b/linux/qtile/config/layout.m4.py
deleted file mode 100644
index cdddb18..0000000
--- a/linux/qtile/config/layout.m4.py
+++ /dev/null
@@ -1,29 +0,0 @@
-layouts = [
-    layout.Columns(border_focus_stack=["#d75f5f", "#8f3d3d"], border_width=4),
-    layout.Max(),
-    # Try more layouts by unleashing below layouts.
-    # layout.Stack(num_stacks=2),
-    # layout.Bsp(),
-    layout.Matrix(),
-    # layout.MonadTall(),
-    # layout.MonadWide(),
-    # layout.RatioTile(),
-    # layout.Tile(),
-    layout.TreeTab(),
-    # layout.VerticalTile(),
-    layout.Zoomy(),
-    # layout.Floating(),
-]
-
-floating_layout = layout.Floating(
-    float_rules=[
-        # Run the utility of `xprop` to see the wm class and name of an X client.
-        *layout.Floating.default_float_rules,
-        Match(wm_class="confirmreset"),  # gitk
-        Match(wm_class="makebranch"),  # gitk
-        Match(wm_class="maketag"),  # gitk
-        Match(wm_class="ssh-askpass"),  # ssh-askpass
-        Match(title="branchdialog"),  # gitk
-        Match(title="pinentry"),  # GPG key password entry
-    ]
-)
diff --git a/linux/qtile/config/screen.m4.py b/linux/qtile/config/screen.m4.py
deleted file mode 100644
index 7511125..0000000
--- a/linux/qtile/config/screen.m4.py
+++ /dev/null
@@ -1,115 +0,0 @@
-from Xlib import display as xdisplay
-
-def get_monitors():
-  display = xdisplay.Display()
-  screen = display.screen()
-  resources = screen.root.xrandr_get_screen_resources()
-  return [display.xrandr_get_output_info(output, resources.config_timestamp)
-          for output in resources.outputs]
-
-
-# See https://github.com/qtile/qtile/wiki/screens
-def get_num_monitors():
-    num_monitors = 0
-    try:
-        for monitor in get_monitors():
-            preferred = False
-            if hasattr(monitor, 'preferred'):
-                preferred = monitor.preferred
-            elif hasattr(monitor, 'num_preferred'):
-                preferred = monitor.num_preferred
-            if preferred:
-                num_monitors += 1
-    except Exception as e:
-        logger.error(e)
-        # always setup at least one monitor
-        return 1
-    else:
-        return num_monitors
-
-
-widget_defaults = dict(
-    font="sans",
-    fontsize=12,
-    padding=3,
-)
-extension_defaults = widget_defaults.copy()
-widget_systray = widget.Systray()
-widget_pomodoro = widget.Pomodoro()
-
-def get_widgets(systray: bool = False):
-    w = list()
-    w.append(widget.CurrentLayout())
-    w.append(widget.GroupBox(
-        highlight_method="line",
-        hide_unused=True,
-    ))
-    w.append(widget.Prompt())
-    w.append(widget.Chord(
-        chords_colors={
-            "launch": ("#ff0000", "#ffffff"),
-        },
-        name_transform=lambda name: name.upper(),
-    ))
-
-    w.append(widget.Spacer())
-    w.append(widget.Clock(format="%H:%M (%d-%m-%Y)"))
-    w.append(widget.Spacer())
-
-    w.append(widget.Notify())
-    w.append(widget.Sep())
-    w.append(widget_pomodoro)
-    w.append(widget.Sep())
-    w.append(widget.Volume())
-    w.append(widget.Sep())
-    w.append(UPowerWidget())
-    w.append(widget.Sep())
-
-    # NB Systray is incompatible with Wayland, consider using StatusNotifier instead
-    #w.append(widget.StatusNotifier())
-    if systray:
-        global widget_systray
-        w.append(widget_systray)
-    #w.append(widget.QuickExit())
-    return w
-
-def make_bar(systray: bool = False):
-    return bar.Bar(
-        get_widgets(systray),
-        24,
-        background="#2b303b",
-        # border_width=[2, 0, 2, 0],  # Draw top and bottom borders
-        # border_color=["ff00ff", "000000", "ff00ff", "000000"]  # Borders are magenta
-    )
-
-def make_screen(systray: bool = False):
-    return Screen(
-       top=make_bar(systray),
-       # you can uncomment this variable if you see that on x11 floating resize/moving is laggy
-       # by default we handle these events delayed to already improve performance, however your system might still be struggling
-       # this variable is set to none (no cap) by default, but you can set it to 60 to indicate that you limit it to 60 events per second
-       # x11_drag_polling_rate = 60,
-        wallpaper=wallpapers.WALLPAPER_TILES,
-        wallpaper_mode="fill",
-    )
-
-def run_screen_reconfiguration():
-    logger.warn("reconfiguring screens")
-
-    global screens
-    screens = [make_screen(True)]
-
-    global num_monitors
-    num_monitors = get_num_monitors()
-    if num_monitors > 1:
-        for i in range(num_monitors - 1):
-            logger.warn(f"Adding additional screen {i+1} of {num_monitors-1}")
-            screens.append(make_screen(False))
-
-run_screen_reconfiguration()
-
-# Reload on screen change
-@hook.subscribe.screens_reconfigured
-def screen_reconf(_):
-    run_screen_reconfiguration()
-    qtile.cmd_reload_config()
diff --git a/linux/qtile/qtile-wayland.desktop b/linux/qtile/qtile-wayland.desktop
deleted file mode 100644
index 3445e1d..0000000
--- a/linux/qtile/qtile-wayland.desktop
+++ /dev/null
@@ -1,6 +0,0 @@
-[Desktop Entry]
-Name=Qtile (Wayland)
-Comment=Qtile Session
-Exec=qtile start -b wayland
-Type=Application
-Keywords=wm;tiling
diff --git a/linux/qtile/qtile.desktop b/linux/qtile/qtile.desktop
deleted file mode 100644
index 59c4c9b..0000000
--- a/linux/qtile/qtile.desktop
+++ /dev/null
@@ -1,6 +0,0 @@
-[Desktop Entry]
-Name=Qtile (X11)
-Comment=Qtile Session
-Exec=qtile start
-Type=Application
-Keywords=wm;tiling
diff --git a/linux/sxhkd/sxhkdrc b/linux/sxhkd/sxhkdrc
deleted file mode 100644
index d8fa1e1..0000000
--- a/linux/sxhkd/sxhkdrc
+++ /dev/null
@@ -1,147 +0,0 @@
-#
-# wm independent hotkeys
-#
-
-# terminal emulator
-super + Return
-	alacritty
-
-# program launcher
-super + d
-	rofi -show drun
-
-# make sxhkd reload its configuration files:
-super + Escape
-	pkill -USR1 -x sxhkd
-
-# Lock
-super + l
-	XSECURELOCK_SAVER=saver_xscreensaver xsecurelock
-
-#
-# bspwm hotkeys
-#
-
-# quit/restart bspwm
-super + shift + c
-	bspc wm -r
-
-super + alt + q
-	bspc quit
-
-# close and kill
-alt + F4
-	bspc node -c
-
-# alternate between the tiled and monocle layout
-super + m
-	bspc desktop -l next
-
-# send the newest marked node to the newest preselected node
-super + y
-	bspc node newest.marked.local -n newest.!automatic.local
-
-# swap the current node and the biggest window
-super + g
-	bspc node -s biggest.window
-
-#
-# state/flags
-#
-
-# set the window state
-super + {t,shift + t,space,f}
-	bspc node -t {tiled,pseudo_tiled,floating,fullscreen}
-
-# set the node flags
-super + ctrl + {m,x,y,z}
-	bspc node -g {marked,locked,sticky,private}
-
-#
-# focus/swap
-#
-
-# focus the node in the given direction
-super + {_,shift + }{h,j,k,l}
-	bspc node -{f,s} {west,south,north,east}
-
-# focus the node for the given path jump
-super + {p,b,comma,period}
-	bspc node -f @{parent,brother,first,second}
-
-# focus the next/previous window in the current desktop
-super + {_,shift + }c
-	bspc node -f {next,prev}.local.!hidden.window
-
-# focus the next/previous desktop in the current monitor
-super + bracket{left,right}
-	bspc desktop -f {prev,next}.local
-
-# focus the last node/desktop
-super + {grave,Tab}
-	bspc {node,desktop} -f last
-
-# focus the older or newer node in the focus history
-super + {o,i}
-	bspc wm -h off; \
-	bspc node {older,newer} -f; \
-	bspc wm -h on
-
-# focus or send to the given desktop
-super + {_,shift + }{1-9,0}
-	bspc {desktop -f,node -d} '^{1-9,10}'
-
-#
-# preselect
-#
-
-# preselect the direction
-super + ctrl + {h,j,k,l}
-	bspc node -p {west,south,north,east}
-
-# preselect the ratio
-super + ctrl + {1-9}
-	bspc node -o 0.{1-9}
-
-# cancel the preselection for the focused node
-super + ctrl + space
-	bspc node -p cancel
-
-# cancel the preselection for the focused desktop
-super + ctrl + shift + space
-	bspc query -N -d | xargs -I id -n 1 bspc node id -p cancel
-
-#
-# move/resize
-#
-
-# expand a window by moving one of its side outward
-super + alt + {h,j,k,l}
-	bspc node -z {left -20 0,bottom 0 20,top 0 -20,right 20 0}
-
-# contract a window by moving one of its side inward
-super + alt + shift + {h,j,k,l}
-	bspc node -z {right -20 0,top 0 20,bottom 0 -20,left 20 0}
-
-# move a floating window
-super + {Left,Down,Up,Right}
-	bspc node -v {-20 0,0 20,0 -20,20 0}
-
-#Volume Control
-XF86AudioLowerVolume
-	amixer set Master 5%-
-XF86AudioRaiseVolume
-	amixer set Master 5%+
-XF86AudioMute
-        amixer set Master toggle
-
-# Brightness
-XF86MonBrightnessDown 
-    xbacklight -dec 5
-
-XF86MonBrightnessUp 
-    xbacklight -inc 5
-    
-# keyboard layouts
-super + shift + @space
-    {setxkbmap no, setxkbmap us}
diff --git a/linux/umon/umon.conf b/linux/umon/umon.conf
deleted file mode 100644
index 8321667..0000000
--- a/linux/umon/umon.conf
+++ /dev/null
@@ -1,51 +0,0 @@
-{
-    "HDMI": {
-        "Screen": {
-            "width": 4480,
-            "height": 1440,
-            "widthMM": 1185,
-            "heightMM": 381
-        },
-        "Monitors": {
-            "eDP10\u007f": {
-                "edid": "BOE0unknown unkn",
-                "primary": true,
-                "x": 0,
-                "y": 360,
-                "rotate_setting": 1,
-                "width": 1920,
-                "height": 1080,
-                "refresh_rate": 60.0
-            },
-            "HDMI10": {
-                "edid": "LEN0L24q-10 L24q",
-                "x": 1920,
-                "y": 0,
-                "rotate_setting": 1,
-                "width": 2560,
-                "height": 1440,
-                "refresh_rate": 59.95
-            }
-        }
-    },
-    "laptop-only": {
-        "Screen": {
-            "width": 1920,
-            "height": 1080,
-            "widthMM": 508,
-            "heightMM": 285
-        },
-        "Monitors": {
-            "eDP10\u007f": {
-                "edid": "BOE0unknown unkn",
-                "primary": true,
-                "x": 0,
-                "y": 0,
-                "rotate_setting": 1,
-                "width": 1920,
-                "height": 1080,
-                "refresh_rate": 60.0
-            }
-        }
-    }
-}
\ No newline at end of file